Plenary Lecture & Thematic Plenary Lecture
| Study interactions between inhaled nanoparticles and pulmonary surfactant using molecular dynamics simulations | |
| Guoqing Hu, Xuan Bai, Qinglin Hu |
| Computational Optimization for Biomechanics and Biomedical Engineering | |
| Qing Li |
| A frictional contact algorithm for implicit material point method | |
| Zhenpeng Chen, Xiong Zhang, Xinming Qiu, Yan Liu |
| In Vivo Magnetic Resonance Image-Based 3D Computational Models to Quantify Right Ventricle Morphological and Mechanical Characteristics for Healthy and Patients with Tetralogy of Fallot | |
| Heng Zuo, Dalin Tang, Chun Yang, Zheyang Wu, Xueying Huang, Rahul H. Rathod, Alexander Tang, Kristen L. Billiar, Tal Geva |
| The Effect of Residual Stress on Stress-Modulated Growth in an Artery | |
| Lucy T. Zhang |
| The Hydrodynamics of the WIG (Wing-In-Ground) Effect Craft | |
| Boo-Cheong Khoo |
| naoe-FOAM-SJTU Solver with Efficient Overset Techniques for Ship Flows and Ocean Engineering Flows | |
| Decheng Wan |
| MATES : Multi-Agent based Traffic and Environmental Simulator - Core Technologies and Practical Applications – | |
| Shinobu Yoshimura |
| Non-classical continuum modeling of materials with microstructure: a multiscale/multifield approach | |
| Trovalusci a_Patrizia |
| A Two-Phase Flow Model for Aerogel in a Non-Equilibrium Process | |
| Dia Zeidan, Eric Goncalves, Lucy T Zhang |
| A complex variable interpolating meshless method for two-dimensional transient heat conduction problem | |
| Xiaoqiao He |
| Progress in Multiscale Multimodel Simulation of Fluid-Structure Interaction in Marine Engineering | |
| Qingwei Ma |
| Structural Optimization, the past, present and future | |
| Gengdong Cheng |
| Computational mechanics as a power tool for exploration of deformation mechanism of nanomaterials and mechanobiology | |
| Yuantong Gu |
| Simulating dynamic disaster evolution of soil flowslide triggered by earthquakes | |
| Yu Huang |
| Towards Virtual Testing of Flapping Flight | |
| Yao Zheng |
MS-000 General Papers
| A finite element model of crimped fibril reinforced composite to predict the mechanical response subjected to tensile load | |
| Li Liu, Dean Hu, Xu Han |
| Research on the biomechanics of lumbar muscles based on musculoskeletal model | |
| Xiaotong Zhan, Zhiyong Li, Qiang Chen |
| Influence factors of teachers’ pro-industry teaching demand adjust Industry 4.0 | |
| Chun-Mei Chou |
| Computational Approach to Analyzing 3D Strain Distribution in Opaque Materials via Micro Computer Tomography | |
| Lingtao Mao, Haizhou Liu, Fu-pen Chiang |
| Periodic DFT study of structural transformations of crystalline dihydroxylammonium 5,5'-bistetrazole-1,1'-diolate under high pressures | |
| Guozheng Zhao, Hairui Sun |
| Computational method for geometric properties of arbitrary plane areas | |
| Xiaoliang CHEN |
| 3D Simulation of the Defect Generation by Hydrogen at $Si-SiO_2$ Interface | |
| Zhaocan Ma, Jingjie Xu, Hongliang Li, Yu Song, Linbo Zhang, Benzhuo Lu |
| Design Pattern Enabling the Flexible Integration of Effects into a Basis Flow Model | |
| Tatiana Reiche |
| On Improving Evolutionary Algorithms and Acceleration Techniques Based on Estimation of Convergence Point Population for Chosen Optimization Problems of Mechanics | |
| Janusz Orkisz, Maciej Glowacki |
| A reduced-order modeling technique for nonlinear buckling analysis | |
| Ke Liang |
| The Cardinal spline methods for the numerical solution of nonlinear integral equations | |
| Xiaoyan Liu, Jiahuan Huang |
| A truss section size optimization design method based on constraint variation principle | |
| Yubin Liu, Xin Zheng, Shengjun Zhang, Feng Shen, Xiangrong Fu |
| Flutter frequency based on bending - torsion coupling theory | |
| Xin Zheng, Yu-Bin LIU, Pu CHEN, Feng SHEN, Sheng-Jun ZHANG, Xiang-Rong FU |
| Simulation driven development of a CFRPT gearbox housing | |
| Thomas Schneider, Monika Kreutzmann, Raik Rademacher, Christophe Dominé, Herve Motte, Chye Hock Tok |
| An Optimal Control Obtained by Finite Dimensional Approximation for a Flexible Robot Arm | |
| Xuezhang Hou |
| Crashworthiness of Different Composite and Aluminum Tubes with Foam Filling by experiments and simulations | |
| Zheyi Zhang |
| A finite element contact analysis algorithm using distance functions | |
| Xian Chen, Fei Jiang, Junji Ohgi |
| Pattern Matching for Industrial Object Recognition Using Geometry Based Vector Mapping Descriptor | |
| Dongsung Pae |
| Random walk of Brownian particles on non-uniform grids | |
| Jianwen Zhang, Zirui Li |
| Pointwise Gauge Field and Relativistic Structure | |
| Yi-Ping Wang |
| Riemann Function and Relativistic Structure | |
| Yi-Ping Wang |
| SIMULATION AND EXPERIMENTAL RESEARCH ON THE SLICING TEMPERATURE OF THE SAPPHIRE WITH DIAMOND WIRE | |
| 雪润 黄 |
| Robust optimization study of wind farm layout by Monte Carlo simulation method | |
| Longyan Wang |
| Analytical and experimental investigation on crack generated in diameter-enlargement section | |
| Xia Zhu, Nagatoshi Okabe, Keiji Ogi, Hiromichi Toyota |
| A new SPH iterative method for solving nonlinear equations | |
| Rahmatjan Imin |
| High Order Discontinuous Galerkin Method for the Euler Equations Using Curved Elements | |
| Penghui Su, Liang Zhang |
| Design of pedestrian friendly vehicle frontal protection system using computer modelling and simulation | |
| Jiaqi Chen |
| CFD analysis of the heat transfer of fire doors under the standard time-temperature curve | |
| Hou-Kuan Tam, Hau-Yin Leung, Lap-Mou Tam, Seng-Kin Lao |
| Micromechanics-based multiscale analysis for heterogeneous materials | |
| Chunhui Yang |
| An optimal eighth-order scheme for multiple zeros of univariate functions | |
| Ramandeep Behl, Fiza Zafar, Ali Saleh Alshomrani, Moin-ud-din Junjua, Nusrat Yasmin |
MS-001 Theory and Formulation for Novel Computational Methods
| Numerical methods for structural dynamic responses based on radial basis functions approximation | |
| Yanting Li, Jiqing Xu, Xibin Xu |
| A novel method to improve the multiple-scales solution of the forced strongly nonlinear oscillators | |
| Hai-En Du, Guo-Kang Er, Vai Pan Iu |
| A solid-shell finite element formulation based on the Cosserat point theory for modeling composite structures | |
| Jabareen Mahmood |
| A research of patient-specific flow boundary condition in noninvasive coronary fractional flow reserve | |
| Yang Qingqing, Qiao Aike |
| A bounding method for contact stress using fractional programming | |
| Zhaocheng Xuan |
| Nystrom extrapolation algorithm for solving delay Volterra integral equations with weakly singular kernel | |
| li zhang, Jin Huang, Yubin Pan, Hongyan Liu |
| A Non-standard Finite-difference Scheme for a Burgers-Fisher Partial Differential Equation with Bounded Travelling-wave solutions | |
| G.F Sun, G.R Liu |
| Consistent high order meshfree Galerkin methods and applications | |
| Duan Qinglin |
| Hybrid approximation spaces for solving compressible Navier-Stokes equations with high Reynolds number | |
| Fan Zhang, Jian Cheng, Tiegang Liu |
MS-002 Continuum Damage Mechanics: Recent Developments and Applications
| Higher order extension of PDS-FEM and simulating brittle cracks | |
| Maddegedara Lalith Lakshman Wijerathne |
MS-003 Adaptive numerical methods
| Numerical Study on Growth of Strata Disturbance Abscission Layer | |
| guangming yu |
MS-004 Smoothed Finite Element Methods and Related Techniques
| A stabilization method of F-barES-FEM-T4 for dynamic explicit analysis of nearly incompressible solids | |
| Ryoya Iida, Yuki Onishi, Kenji Amaya |
| Accurate viscoelastic large deformation analysis using F-bar aided edge-based smoothed finite element method for 4-node tetrahedral meshes (F-barES-FEM-T4) | |
| Yuki Onishi, Ryoya Iida, Kenji Amaya |
| A parallel preconditioned Gauss-Seidel iterative method tailored for smoothed finite element method’s solving | |
| Jianfeng Zhang |
| Stability analysis of smoothed finite element method with explicit method for transient heat transfer | |
| Xin Rong, Ming Li, Ruiping Niu |
| Solution bound and nearly exact solution to 3D nonlinear solid mechanics problems using S-FEM | |
| S.W Wu |
| A novel alpha smoothed finite elements method for ultra-accurate solution using quadrilateral elements | |
| yanhua li |
| The design and development of the postprocessor for 2D S-FEM analysis software | |
| fei yu Zhang |
| The design and development of the preprocessor for 3D S-FEM analysis software | |
| chunqiao wang |
| A Characteristic based ES-FEM with Polynomial Pressure Projection for Incompressible flows | |
| Chen Jiang, Xu Han, G.R. Liu |
| Static and free vibration of laminated composite plates using higher order cell-based smoothed finite element method with Q8 elements | |
| Dean Hu |
| A weakened weak (W2) form and a G space | |
| Ming Li |
MS-005 Numerical methods blending mesh-based and mesh-free technique
| Thermoelastic analysis of FGM beam using meshless weighted least-square method | |
| Hongmei zhou |
| A complex variable interpolating meshless method for two-dimensional transient heat conduction problem | |
| Ya Jie Deng, Xiao Qiao He |
MS-006 Modelling and Characterisation of Mechanical Behaviour of Advanced Materials
| An Experimental and Computational Study of Plastic Deformation in Silicon Carbides | |
| Dezhou Zhang, Liguo Zhao, Anish Roy |
| Mechanical Performance of Bioresorbable Polymeric Stents during Crimping and Expansion in Diseased Artery | |
| Tianyang Qiu, Liguo Zhao, Mo Song |
| The shear mechanical properties of graphene/copper nanolayered composites | |
| Jun HUA |
| Tensile Mechanical Properties and Its Failure Modes of the Basalt Fiber/Epoxy Resin Composite Material | |
| jingjing he, junping shi, xiaoshan cao, tielin han |
| AGR Gas Baffle Fragment and Fuelling Guide Tube Impact Analysis | |
| Antony Hurst |
| Numerical calculation of material configurational force based on ABAQUS secondary development and its applications | |
| Yue Chen, Qun Li |
| Crack interacting with an individual hole by the fracture criterion of configurational force | |
| Bin Gu, Yuli Guo, Qun Li |
| Shakedown analysis of structures with temperature-dependent properties | |
| SHYUE-YUH LEU |
| The DCM Simulations of the Matrix Dislocation Gliding through the Matrix Channel under the Influence of the Interfacial Dislocation Network | |
| huang song |
| Nanovoids induced homogeneous superplastic in metallic metal | |
| bida Zhu |
MS-007 Numerical modelling of nonlinear transient phenomena
| A parallel between numerical and physical worlds of dynamic systems: the true spectral properties - a challenge in current modelling and simulation methods | |
| Pawel Packo |
| Investigation of dispersion effects in plates from a numerical point of view | |
| Piotr Kijanka, Pawel Packo, Rafal Radecki, Michael J. Leamy |
| An Efficient Rotation-free Triangle and its Application | |
| Yexin Zhou |
MS-008 Algorithms, Software and Applications of Large-Scale Computation
| GPU-based Parallel implementation of Explicit Meshfree methods | |
| Yong Cai |
| Implementation of global switching algorithm for trajectory surface hopping molecular dynamics in Newton-X package and benchmark performance on the Cis↔trans azobenzene photoisomerization | |
| Ling Yue |
| Large CAD assembly design analysis using Sefea (Strain-Enriched FEA) and MLS (Moving Least Squares) formulation | |
| Yu Hou |
| Fourier transform analysis of convergence properties of MultiGrid V-cycle algorithms | |
| Yu Zhang, Ming Li, Guirong Liu |
| Large scale traffic evacuation simulation based on multi-agent modeling | |
| shuiping Yu, Shengcheng Yuan, Yi Liu, Jing Qian |
| Building Language Models with Fuzzy Weights | |
| Tsan-Jung He, Shie-Jue Lee, Chih-Hung Wu |
| Recent Advances in Automatic and Parallel Mesh Generation | |
| Jianjun Chen |
MS-009 Particle Based Methods
| Development of Generalized Interpolation Material Point Method for Fully-Coupled Thermo-mechanics with Applications to Model-Based Simulation of Failure Evolution | |
| Jun Tao, Zhen Chen, Yonggang Zheng, Hongwu Zhang |
| Simulation of high-velocity impact process of 3D woven orthogonal composite from meso-scale point-based model | |
| Yan Liu, Xuena Si, Xiong Zhang |
| Accelerating Peridynamics Program Using GPU with CUDA and OpenACC | |
| J.X. Li, J.M. Zhao, F. Xu, Y.J. Liu |
| Time-discontinuous Material Point Method for Transient Problems involving Discontinuities in Stress | |
| Yonggang Zheng, Mengkai Lu, Jiayong Zhang, Hongwu Zhang, Zhen Chen |
| Meshfree Methods and Isogeometric Analysis: Consistency Conditions, Reproducing Kernel Unification and Local Refinement | |
| Dongdong Wang |
| Consistent inlet and outlet conditions for ALE particle method | |
| Fangyuan Hu |
| A smoothed MPM algorithm for elastodynamics | |
| Lisha He, Zhen Chen, Yong Gan |
| A meshfree method for inverse wave propagation using collocation and radial basis functions | |
| Lihua Wang |
| Simulation of hydraulic fracturing process by using peridynamics | |
| Shuhui Li, Fan Wu |
MS-010 Methods for Multi-Phase Flows
| Stretching of Viscous Threads | |
| Jonathan Wylie |
MS-011 Advanced Computational Methods in Underwater Acoustics
| Static, free vibration and underwater sound radiation of stiffened plates by ES-FEM using triangular element | |
| Qian Xiao |
| A smoothed finite element method for underwater acoustic scattering problems in two dimensions | |
| Chai Ying Bin |
| Calculation and analysis on axial acoustic radiation force of a Bessel beam on sphere particals | |
| mingsheng wang |
| 3D image reconstruction for underwater objects based on ramp response | |
| Yu Weiping |
| Solving time-dependent acoustic problems with a Lagrangian meshfree finite difference particle method | |
| YongOu Zhang |
MS-012 Computational Modeling for Cardiovascular Disease and Biological Applications
| Numerical Simulation of Instantaneous Wave-Free Ratio of Stenosed Coronary Artery | |
| Wenxin Wang, Youjun Liu, Boyan Mao, Bao Li |
| Association of simultaneously measured limbs blood pressure differences with ankle-brachial index | |
| Xiaorui SONG |
| Fatigue life prediction of stents in a realistic coronary stenosis model | |
| xinyang cui |
| Study of applied tissue power in microwave ablation | |
| Tong Dong, Qun Nan, Zhen Tian, Xiaohui Nie, Yanyan Cheng |
| A Segmentation Method for Intracoronary Optical Coherence Tomography (OCT) Image Based on Least Squares Support Vector Machine: Vulnerable Coronary Plaque Cap Thickness Quantification | |
| Xiaoya Guo, Dalin Tang, David Molony, Chun Yang, Habib Samady, Jie Zheng, Gary Mintz, Akiko Maehara, Liang Wang, Xuan Pei, Zhi-Yong Li, Genshan Ma, Don Giddens |
| Carotid Atherosclerotic Plaque Vulnerability Assessment Using 3D Thin-Layer Model with In Vivo Patient-Specific Vessel Material Properties | |
| Qingyu Wang, Gador Canton, Thomas S. Hatsukami, Kristen L Billiar, Chun Yuan, Zheyang Wu, Dalin Tang |
| In Vivo Intravascular Ultrasound-Based 3D Thin-Walled Model for Human Coronary Plaque Progression Study: Transforming Research to Potential Commercialization | |
| Jian Guo, Dalin Tang, Genshan Ma, Liang Wang, David Molony, Habib Samady, Jie Zheng, Xiaoya Guo, Akiko Maehara, Gary Mintz, Jian Zhu |
| Patient-Specific Echo-Based Left Ventricle Models for Active Contraction and Relaxation Using Different Zero-Load Diastole and Systole Geometries | |
| Longling Fan, Jing Yao, Chun Yang, Di Xu, Dalin Tang |
| Efficient Epigenetic Effect Identification in eQTL mapping with RNA-seq data | |
| Feifei Xiao |
| Reproducibility of optical coherence tomography imaging based measurements of the fibrous cap thickness in lipid-enrich atheroma | |
| Chunliu He, Zhiyong Li, Jiaqiu Wang, Yuxiang Huang, Yuehong Miao, Tongjing Zhu |
| Machine learning based image segmentation of intravascular optical coherence tomography images | |
| YuXiang Huang |
| A treatment planning of radiofrequency ablation for spinal tumor | |
| tian zhen |
| Effect of distal stenosis on the blood flow in right coronary arteries with serial stenoses | |
| Biyue Liu, Dalin Tang |
| Pressure variation after stent intervention for a giant aneurysm complicated by a stenosis | |
| Wenyu Fu, Aike Qiao |
| An investigation of correlation between left coronary bifurcation angle and hemodynamic changes in coronary stenosis by coronary computed tomography angiography-derived computational fluid dynamics | |
| Zhonghua Sun, Sultan Aldosari, Thanapong Chaichana |
| An FSI modeling approach to combine IVUS and OCT for more accurate patient-specific coronary cap thickness and stress/strain calculations | |
| Xiaoya Guo, Don Giddens, David Molony, Chun Yang, Habib Samady, Jie Zheng, Gary Mintz, Akiko Maehara, Liang Wang, Xuan Pei, Zhi-Yong Li, Dalin Tang |
| The method of personalized lumped parameter model of coronary artery | |
| Bao Li, Wenxin Wang, Xi Zhao, Boyan Mao, Youjun Liu, Zhou Zhao |
| Effect of stent designs on the paravalvular regurgitation of transcatheter aortic valve implantation | |
| Jin Chang |
| Geometric calibration based on a simple phantom for multi-lens microscopic CT | |
| Luo Shouhua, Xu Haitao, Zheng Liang, Zhang Xiaobing, Shen Tao |
| Combined Study for Estimation of Coronary Flow based on Flow Distribution in the Coronary Tree | |
| Idit Avrahami |
| Hemodynamic effects of lesion length on competitive flow with internal mammary artery bypass | |
| Boyan Mao, Huixia Zhang, Wenxin Wang, Bao Li, Youjun Liu |
| Applying virtual stent deployment to study flow-diversion treatment for intracranial aneurysms: the effect of stent compaction on post-treatment wire configuration | |
| Mingzi Zhang, Yujie Li, David I. Verrelli, Winston Chong, Makoto Ohta, Yi Qian |
| Modelling flow-diverting stent as porous medium with different permeabilities in the treatment of intracranial aneurysms: a comparison of a successfully treated case and an unsuccessful one | |
| Yujie Li, Mingzi Zhang, David I. Verrelli, William Yang, Winston Chong, Makoto Ohta, Yi Qian |
| Impact of carotid bifurcation geometry on atherosclerotic formation: A hemodynamic study | |
| Xin-Ke Yao, Yan Cai, Jie Gao, Ge-Lin Xu, Zhi-Yong Li |
MS-013 Advances in BEM and Other Mesh-Reduction Methods
| Fast adaptive binary-tree mesh generation | |
| Jianming Zhang, Chuanming Ju |
| Boundary and current elements for simulation of electromagnetic fields of complicated spatial configuration | |
| Andrey Trubitsyn |
| Accelerating BEM in macromolecular electrostatics computing | |
| Benzhuo Lu |
| A group of benchmark problems for local stress analysis of real cantilever plate using high accuracy and high performance BEM | |
| Zhenhan Yao |
| Expanding element interpolation method for 2D crack problems | |
| Jianming Zhang, Yunqiao Dong |
| On implementation of the boundary integral equation method | |
| Jianming Zhang |
| A double-layer interpolation boundary face method for potential problems in two dimensions | |
| Jianming Zhang, Weicheng Lin |
| Time-domain BEM analysis for elastodynamic problems using expanding element interpolation method | |
| Jianming Zhang, Yudong Zhong |
| An Automatic Topology Recovery Method Based on T-Spline Surfaces Reconstruction in BFM | |
| Baotao Chi, Jianming Zhang |
| Solving the pressure jump in conforming contact problems | |
| Xiaomin Shu, Jianming Zhang |
| Simulation of sound transmission through thin elastic shell by the Coupled FEM/BEM | |
| Zai-you Yan |
| High frequency acoustical scattering problems analysis by boundary element method | |
| Xianhui Wang, Zhiyang Wang |
| Improved method of fundamental solutions in conjunction with kernel-independent fast multipole method for solving potential problems | |
| Zhuojia Fu, Junpi Li, Wen Chen |
| Time-domain isogeometric boundary element method based on the convolution quadrature method for scalar wave propagation | |
| Tsukasa Ito, Takahiro Saitoh, Tinh Quoc Bui, Sohichi Hirose |
| In-plane free vibration of circular and annular FG disks | |
| Yang Yang, Kun Pang Kou, Chi Chiu Lam |
| Shape optimization of acoustic structure using an isogeometric fast multipole boundary element method | |
| Haibo Chen, Cheng Liu, Wenchang Zhao |
| A FEM/BEM based topology optimization of submerged bi-material shell structures under harmonic excitations | |
| Wenchang Zhao, Leilei Chen, Cheng Liu, Haibo Chen |
| Fluid-structure interaction eigenvalue analysis by using a coupled FE-BE solver | |
| Changjun Zheng, Chuanxing Bi, Haibo Chen, Chuanzeng Zhang |
| Numerical simulation of galvanic corrosion by boundary node method | |
| Sanshan Tu, Hong qi Yang, Liang Zhou, Yi Huang |
| An application of fast multipole method to isogeometric boundary element method in two-dimensional acoustic problems | |
| Jie Wang, cheng liu, haibo chen |
| A new implementation of time domain boundary element method for 3D transient heat conduction problems | |
| Zhou Fenglin |
| Flows in out-phase slip-patterned micro-channels using boundary element methods | |
| Chandra Shekhar Nishad, Anirban Chandra, G.P. Raja Sekhar |
| A new fast direct solver for the BEM | |
| Yijun Liu, Shuo Huang |
| Band Structures of Phononic Crystals with Defects Based on the Boundary Element Method | |
| Feng-lian Li |
| Cross-line method (CLM) for solving partial differential equations | |
| Xiao-Wei Gao |
| Determination of scattering frequencies for 2D acoustic problems using boundary element method | |
| Haifeng Gao, Changjun Zheng |
MS-014 Modelling and Simulation of Complex Systems
| 3D Nonlinear dynamical analysis of cable-stayed offshore structures | |
| Kun Wang, Guo-Kang Er, Vai Pan Iu |
| Poisson-Nernst-Planck Simulations for Enzyme and Nanopore Systems | |
| Jingjie Xu |
| Mean Field Free Energy Functional of Electrolyte Solution with Non-homogenous BCs and the Generalized PB/PNP Equations | |
| Xuejiao Liu |
| Concept of dynamical traps in modeling human behavior | |
| Ihor Lubashevsky |
| The nonlinear vibration of curved micro beams under axial and electrostatic forces | |
| Yan Yan, Wenquan Wang |
| Quality simulation and decision-making method for complex product integrated manufacturing system | |
| pang jihong |
| Genetic Algorithms In Electoral Districting | |
| Maw-kae Hor |
MS-015 Fluid-Structure Interaction and Multiphysics Problems in Aerospace Engineering
| Analysis of Modal Characteristics and Reconstructions of Rotating Flow Field Using POD Method | |
| Jianyao Yao |
| Transport and Deposition in the Terminal Bronchioles of Large Scale 17-Generation Model | |
| Mohammad S. Islam, Suvash C. Saha, Emilie Sauret, Yuantong Gu |
| Control of Energy Flow and Wave Propagation by Periodically Distributing Piezoelectric Materials with Identical Shunting Circuits | |
| Yu FAN, Lin Li, Olivier Bareille, Mohamed Ichchou |
MS-016 Multiscale modelling of damage and fracture in quasi-brittle materials
| A discrete-continuum coupled finite element model to simulate all failure modes in fibre reinforced concrete | |
| hui zhang, Yujie Huang, Zhenjun Yang, Shilang Xu |
| Three-dimensional meso-scale cohesive fracture modeling of concrete using a Python script in ABAQUS | |
| Yujie Huang, Yang Zhenjun, Liu Guahua |
| 3D meso-scale fracture modelling and validation of concrete based on in situ X-ray CT images and cohesive crack model | |
| Wenyuan Ren, Zhenjun Yang, Rajneesh Sharma, Sam McDonald, Paul Mummery |
| Micromechanical Studies of Strain Rate Dependent Compressive Strength in Brittle Polycrystalline Materials | |
| Bo Li, Hao Jiang, Zongyue Fan |
| A Model of Fracture Propagation Considering Fluid Pressure in Cracks Using SBFEM | |
| feng yao, zhenjun yang, Yunjin Hu |
| Cracking pattern of shale reservoirs by water, CO2 and nitrogen fracturing | |
| Jianguo Wang, Xiangxiang Zhang |
MS-017 Computational errors and their evaluation
| An Optimisation Study of Radial Point Interpolation Meshfree Method for Various Applications | |
| Farnaz Ostovari |
| Extrapolation Methods for Computing Supersingular Integral on a Circle | |
| Jin Li |
MS-018 Computational modeling and experimental characterization of soft tissues
| Calculation of unloaded configurations for finite element simulations of patient-specific geometries with application to human common carotid artery | |
| Xuhui Li, Mikhail Itskov, Mahmood Jabareen |
| Simulation of Biological Tissues using Numerical Hyperelasticity and Strain-Enriched Finite Element Analysis (Sefea) | |
| H. Theodore Lin |
MS-019 Large Scale Coupled Problems and Related Topics
| Parameters optimization of hydraulic fracturing for improving fracture complexity in shale reservoirs | |
| Chuang Liu |
| Performance evaluation of large-scale high-frequency electromagnetic field simulations using iterative substructuring methods | |
| LIJUN LIU, MASAO OGINO |
| Force Analysis of Coastal buildings Damaged by Tsunami Wave Impact Load using Fluid-Structure Coupling Method | |
| Hongjie Zheng, Ryuji Shioya, Naoto Mitsume |
| Development of a partitioned coupling analysis system for fluid-structure interactions using an ISPH code and the ADVENTURE system | |
| Masao Ogino, Takuya Iwama, Mitsuteru Asai |
| A coarse matrix incomplete iterative approach for magnetostatic domain decomposition analysis | |
| Hiroshi Kanayama, Masao Ogino, Shin-ichiro Sugimoto |
| Numerical simulation of the airflow in a small computing center with air conditioning system by domain decomposition method | |
| Hang Bai, Qinghe Yao |
| A Quadric Stabilization Approach on Partitioned Fluid-Structure Interaction Algorithm | |
| Ming-Jian Li |
MS-021 Multi-scale Computational Mechanics for Heterogeneous Materials
| Numerical Simulation of Effect Brought by Presence of Carbon Nanofiber in Carbon Fiber Reinforced Polymer | |
| PeiLiang Bian, Hai Qing |
MS-022 Advanced modeling techniques and applications for polymer based additive manufacturing
| Development of a multi-phase viscoelastic solver for polymer based additive manufacturing simulation | |
| Jun Liu, Kelly Anderson, N. Sridhar |
MS-023 Numerical modelling of fibre reinforced composites under impact and blast
| Numerical modeling of a hybrid GFRP-concrete beam subjected to low-velocity impact loading | |
| Zongjun Li, Amar Khennane, Paul Jonathan Hazell, Alex Remennikov |
| Effect of hole dimension on the impact load path distribution of composite multi-bolt joint | |
| Dean Hu |
| Modelling dynamic response of concrete filled steel tube columns | |
| A.S. Al-Husainy, Zhongwei Guan, S.W. Jones, C. Su |
MS-024 Advanced Computational Methods for Soft Matters
| Buckling of interfacial layers in periodic cellular composite structures | |
| YuHao He, Rong Huang, Zishun Liu |
| Auxetic metamaterials of square structure | |
| Yu Zhou, Zishun LIU |
MS-025 Modelling and Simulation on Nanomechanics
| Mechanical behavior and material design of graphene-based nanocomposites | |
| Hengan Wu |
| Phase transition of two-dimensional water/ice in graphene nanocapillaries | |
| YinBo Zhu |
| Self-irradiation cascade simulations near helium bubbles in gallium-stabilized δ-plutonium | |
| FengChao Wu |
| Mutual transformations between divacancy defects induced by high-energy pulses in graphene | |
| Jun Xia |
| Finite element based micromechanical model for elastic materials containing nanoscale inhomogeneities | |
| Salisa Chaisuwannakorn, Yasothorn Sapsathiarn |
| Strain rate and temperature dependent mechanical properties in CNT-reinforced magnesium composites | |
| Xia Zhou, Xiaoxia Liu, Mengqi Shen |
| Mechanical Properties of Silk Fibroin and Silk-Graphene Interactions based on Molecular Simulations | |
| Yuan Cheng, Yong-Wei Zhang |
| Plastic deformation mechanism in gradient nanoscale grained iron via atomistic model coupled with crystal plasticity finite element simulations | |
| Jia Li |
MS-026 Computational methods and design for impact and blast problems
| Numerical investigation of blast-induced fractures using smoothed particle hydrodynamics | |
| Saba Gharehdash, Luming Shen, Yixiang Gan |
MS-027 Multiscale and Multiphysics Modelling for Complex Materials
| Characterization of damage-healing-plasticity-breakage in multi-scale DEM-FEM modeling of granular material | |
| Xikui Li, Zenghui Wang, Qinglin Duan |
| On more efficient and flexible peridynamics-based computational tools | |
| Ugo Galvanetto, Mirco Zaccariotto |
| Topology optimization of piezoelectric and flexoelectric nano-devices | |
| Timon Rabczuk |
| A new multiscale computation method for geometrically nonlinear analysis of 3D fluid actuated cellular structures | |
| Jun Lv, Liang Zhang, Hongwu Zhang |
MS-028 Advanced Computational Methods for The Mechanical Modeling of Materials and Structures
| Some novel numerical applications of Cosserat continua | |
| Nicholas Fantuzzi, Lorenzo Leonetti, Patrizia Trovalusci, Francesco Tornabene |
| Explicit Isogeometric Topology Optimization Using Moving Morphable Components (MMC) | |
| Wenbin Hou, Yundong Gai, Xuefeng Zhu, Ping Hu, Xuan Wang |
| The Displacement Response Study for Different Graded Parameter Functionally Graded Materials Based on Strip Element Method | |
| Jianhui Tian, Lunlun Ma |
MS-029 Computational Methods in Engineering
| Study of RFD Model Spectrum and the Characteristic Conversion Methods | |
| J.Y. Li, Hui Wang |
| Numerical investigations of centrifugal compressor with corrosion pit defect preset on the disk and blade | |
| Songying Chen, Yanpeng Qu, Xinxin Tang, Dongdong Wan, Juyi Pan |
| Numerical simulation of gasoline blending based on RJM system | |
| pan juyi, Qu Yanpeng, Chen Songying, Wan Dongdong, Tang Xinxin |
| Research on the features of gasoline mixture flow field with rotary jet mixing | |
| Wan Dongdong, Qu Yanpeng, Chen Songying, Pan Juyi, Tang Xinxin |
| Numerical investigation on the gasoline mixture with side entering mechanical agitator | |
| tang Xinxin, Qu Yanpeng, Chen Songying, Pan Juyi, Wan Dongdong |
| Acoustic Characteristics of Three-dimensional Membrane-imbedded Acoustic Metamaterial | |
| Yang Li, Xiaoming Wang, Yulin Mei |
| Backlash Computation of Harmonic Drive Based on Parametric Solid Finite Element Model | |
| Pengpeng Yang, Xiaoxia Chen, Jingzhong Xing, Yunpeng Yao |
| Examples of applications of two-stage method in calculations of statically indeterminate trusses | |
| Janusz Rębielak |
| A Symplectic Approach for Attitude Optimal Control of Spacecraft Solar Array Deployment | |
| HongWei Zhong, shaowei yang, zhiqin cai |
| A multiscale coarse grained model for simulating mechanical responses of plant food tissues | |
| WDCC Wijerathne, I.W. Turner, E. Sauret, H.C.P. Karunasena, W. Senadeera, Y.T. Gu |
| Numerical Simulation of Mars Exploration Rover Heat Shield Separation | |
| Guowu XU |
| Matrix acidizing analysis in fractured carbonate formations by using UPNM | |
| Yun Chen, Guo Wei Ma, Tuo Li, Yang Wang, Feng Ren |
| Temperature variations and cooling efficiency of forced convective heat transfer of nanofluids in microchannel laminar flow | |
| Vai Kuong sin, Ka Kei Teng |
| Investigation of Bridging Method to Predict Rarefied Aerodynamics of Lift Body | |
| Xiao-wen Liu, Guo-hui Dou, An-long Gong |
| Numerical solution of a bioheat transfer problem with transient blood temperature | |
| Kuo-Chi Liu, Fong-Jou Tu |
| Quick and highly precision modal analysis method for all types of structural modifications | |
| jianjun he |
| Numerical manifold method for two-phase flow in fractured-porous media with non-matching mesh | |
| Huidong Wang, Lifeng Fan, Guowei Ma, Bin Wang |
| Modeling fluid structure interaction with large structural displacement using NMM-ALE | |
| Bin Wang, Qiusheng Wang, Guowei Ma, Huidong Wang |
MS-030 Phase-field Method: Theory, Algorithm and Application
| Consistent meshfree method for phase-field model of brittle fracture | |
| yulong Shao |
| A coupled phase-field and finite element method to simulate the elastoplastic deformation induced cementite dissolution in pearlitic rail steels | |
| Hu Chen, Chi Zhang, Lei Chen |
MS-032 Recent Advances in Meshfree and Particle Methods
| Two-dimensional SPH simulation of liquid sloshing in a rotating tank | |
| jiaru shao, Moubin Liu |
| A new formula for predicting the crater size of a target plate produced by hypervelocity impact | |
| zhilang Zhang, moubin Liu |
| The nonlinear analysis by using the sub-domain meshless method | |
| Yong-Ming Guo, Tatuya Hamada, Genki Yagawa, Shunpei Kamitani |
| Pressure control in dissipative particle dynamics and its application in simulating micro- and nano-bubbles | |
| Yuqing Lin, Jiaming Li, Dingyi Pan |
| Generalized-strain - An Efficient Local Meshfree Method in Linear Elasticity | |
| Tiago Oliveira, Wilber Velez, Artur Portela |
| Behaviour study of the generalized-strain mesh-free method (GSMF) | |
| wilber Vélez, Tiago Oliveira, Artur Portela |
| Particle method simulation of violent sloshing under rotational excitation | |
| Min Luo, Chan Ghee Koh |
| The CCVMLS approximation and the envelop method | |
| D.M. Li |
| A novel velocity field correction method to reproduce wake effects in unresolved modeling of granular flows | |
| Zekun Wang, Khuram Walayat, Moubin Liu |
| A multigrid finite element fictitious boundary method for fluid-solid two-phase flows | |
| Khuram Walayat, Zekun Wang, Kamran Usman, Moubin Liu |
| A meshfree method for the transverse vibration of strain gradient nanoplate with elastic boundary condition | |
| Lifeng Wang |
MS-033 Modelling and Simulation of Multifunctional Composite Materials
| Static analysis of functionally graded graphene nanocomposite beams under thermo-electro-mechanical loading | |
| Helong Wu, Sritawat Kitipornchai, Jie Yang, Liao-Liang Ke |
| Application of the improved equivalent static loads optimization theory on the crash condition of vehicle components | |
| QQ Li, Z. C. He, Tao Tao Chen, A. G. Cheng |
| Temperature influences on the performance of a dielectric elastomer generator with consideration of dissipation processes and failures | |
| Shoue Chen, Zhicheng He, Eric Li |
| Finding the periodic solutions of delayed differential equations via solving a optimization problem | |
| Xu Xu, xiaoyong Wang |
| An ultra-accurate algorithm in the design of fluid/solid and solid/fluid phononics crystals | |
| Eric Li |
| Volumetric locking issue with uncertainty in the design of locally resonant acoustic metamaterials | |
| Zhicheng He |
| Topology optimization of laminated composite plates considering hybrid uncertainty | |
| Yi Wu |
| An acoustic pressure-based method for load identification in coupled structural-acoustic system with non-probabilistic uncertain variables | |
| Xinyou Lin |
| Design for structural vibration suppression in laminate acoustic metamaterials | |
| xiao xiao |
| A Molecular Dynamic Study on Nonlinear Vibration Behaviors of Fe Nanowires | |
| Xu Xu, Zhuoqun Zheng |
MS-035 Computational ship mechanics: theory, numerical methods and engineering applications
| Simulation and experimental validation of hydraulic collecting in deep-ocean mining | |
| Guocheng Zhao, Longfei Xiao, Weijie Zhao, Yangrui Cheng |
| Smoothed point interpolation method (S-PIM): A brief history and recent developments | |
| Guiyong Zhang, Da Hui, Shuangqiang Wang, Huan Lu, Gui-Rong Liu |
| Numerical method for underwater explosion loads and the associated structure damage | |
| Rui Han, Yunlong Liu, Aman Zhang |
| Coupling immersed boundary-lattice Boltzmann method with smoothed point interpolation method for large-displacement fluid-structure interaction problems | |
| Shuangqiang Wang, Guiyong Zhang, Yunan Cai, Sheng Li, Jianhua Lu |
| Numerical simulation of shipboard-iceberg collision | |
| zhigang huang, guiyong zhang |
| Numerical simulation of the ice resistance in pack ice conditions | |
| Biye Yang, Guiyong Zhang |
| Comparation with different interface capturing schemes based on gradient smoothing method using unstructured meshes | |
| Da Hui, Guiyong Zhang, Zhi Zong |
| Numerical Predictions of Hydrodynamic Forces and Squat of Ships in Confined Waters | |
| Yi Liu, Lu Zou, Zao-Jian Zou, Teng-Chao Lu |
| Ship optimization design of the resistance and seakeeping performance based on CFD | |
| Aiqin Miao, Decheng Wan |
| CFD Simulation of Flow around a Fixed Paired-Column Semi-Submersible | |
| Decheng Wan |
| The Numerical Investigation on Hydrodynamic Performance of Twisted Rudder during Self-propulsion | |
| Cong Liu, Decheng Wan |
| Numerical modeling of bubbles near rigid boundary using OpenFOAM | |
| Shiping Wang, Tong Li, Aman Zhang |
| A dual wavelet shrinkage procedure for suppressing numerical oscillation for nonlinear hyperbolic equations | |
| Yong Zhao |
| Numerical simulation of the high-speed water entry of a projectile with 3D SPH method | |
| Furen Ming |
| A computational study of the movement of an object driven by the centrifugal pump in the pipeline based on overset meshes | |
| Jie Chen |
| Numerical Simulation of Internal Flow Field Characteristics for a Ducted Propeller | |
| Jie Gong, Chunyu Guo, Tiecheng Wu, Kewei Song, Jianfeng Lin |
| Experimental and Numerical Study on the Wake Field of a 76000 DWT Panamax Bulker | |
| Tiecheng Wu, chunyu Guo, Wanzhen Luo, Jie Gong, Yongze Xu, Wenxuan She |
| Ice Load Calculation of Vessel sailing in Ice Flows by Using DEM Method | |
| Chen Ge, Xu Yong Ze |
| Study for the force and flow around multi-column structure | |
| Bo Zhou |
MS-036 Immersed boundary method for fluid structure interaction
| Computational Fluid Dynamic (CFD) method to simulate complex-structured soft-body locomotion using OpenFOAM | |
| Hui FENG, Peter TODD, Heow Pueh LEE |
| Fluid-structure interaction simulation via the coupling of finite element and lattice Boltzmann methods | |
| Fei Jiang, Xian Chen, Junji Ohgi |
| An immersed boundary-lattice Boltzmann method based on velocity correction and its application | |
| Li Weizhong |
| An ALE formulation of immersed boundary methods for simulating fluid–structure interaction problems | |
| Wenquan Wang |
MS-037 Nanoscale thermal transport and nanomechanics
| Investigating the Effect of Rock Pore Size Distribution on Reservoir Production Performance | |
| Sina Gomari |
| Deformation mechanisms of diamond nanothread-based nanofiber | |
| Haifei Zhan |
| Invited: Thermal Transport in Graphene with Defect and Doping: Phonon Modes Analysis | |
| Shiqian Hu, Jie Chen, Nuo Yang, Baowen Li |
| Nanoscale Heat Energy Transport: A Computational Study | |
| Gang Zhang |
| Hexagonal Boron Nitride: A Promising Substrate for Graphene with High Heat Dissipation | |
| Zhongwei Zhang |
MS-038 Computational and experimental methods on additive manufacturing and related welding technologies
| Simulation analysis of Electron beam melting using a multi-scale model | |
| Pengwei Liu, Xiangyang Cui |
| Friction Stir Spot Welding between Porous TC4 Titanium alloy and Ultra High Molecular Weight Polyethylene | |
| Ke Chen, Muyang Jiang |
| Numerical methods for predictions of mechanical properties and microstructural changes in laser additive manufacturing | |
| Zhao Zhang |
| Finite element simulation of friction stir additive manufacturing | |
| Zhijun Tan, Peng Ge, Zhao Zhang |
| Numerical methods of microstructural changes and predictions of mechanical properties in friction stir welding of AA6005-T6 | |
| Zhenyu Wan, Xia Zhou, Zhao Zhang |
| Edge Effect on Eddy Current Detection for Subsurface Defects in Titanium Alloys | |
| YIbo Wang, Qian Bai, Wei Du, Bi Zhang |
| Meshfree modeling of heat transfer in selective laser melting process | |
| Songtao Chen |
MS-041 Computational Methods in Acoustics and Elastodynamics
| Guided waves in piezoelectric cylindrical structures with sector cross-sections | |
| Bo Zhang, Jiangong Yu, Xiaoming Zhang |
| A meshfree method for dynamic analysis of rotating thick plates with third-order shear deformation theory | |
| chaofan du, Dingguo Zhang, Guirong Liu |
| Transient Wave Propagation and Early Short Time Transient Response Analysis of Piezoelectric Shells | |
| Yunying Zhou |
| 2-D inverse scattering analysis for a defect in authentic stainless steels | |
| Takahiro SAITOH, Yu INAGAKI, Akira FURUKAWA, Sohichi HIROSE |
| Acoustical Properties of the Composite Structures Made of Micro-Perforated Plates and Honeycomb Core | |
| Menglin Li, Fei Xu |
| Wave propagation in an elastic waveguide: application of the Fourier transform and finite element methods | |
| Evgenia Kirillova, Wolfgang Seemann, Maria Shevtsova |
| Tunability of Soft Phononic Crystal with Lattice Structures Under Large Deformation | |
| Ronghao BAO, Weiqiu CHEN |
| The Effectiveness of the Perfectly Matched Layer in Fluid-Structure Interaction Problems | |
| Ni Zhen |
MS-042 Numerical modelling methods and applications in renewable energy flows
| Wind field simulation over complex terrain with isogeometric analysis | |
| Rafael Montenegro, J.M. Escobar, J.I. López, M. Brovka, A. Oliver, G. Montero, E. Rodríguez, G.V. Socorro-Marrero |
| Effect of turbulent Schmidt number on the scalar field simulation of a fluidic precessing jet flow | |
| Zhao Feng Tian, Xiao Chen |
MS-044 Structural optimization method and application
| Towards optimal design of multiscale nonlinear structures and reduced order modeling approaches | |
| Liang Xia |
| Design of lightest pyramidal lattice hollow truss structures with maximum sound insulation performance under random and interval uncertainties | |
| Jie Liu |
| Topology optimization method based on isoparametric element | |
| hongxin wang |
| Optimum structure of micropolar solids under momentum load conditions | |
| Yutaka Arimitsu |
| Shape optimum design of shear panel damper made of low yield steel | |
| Yang LIU |
| Stability Optimization of A Two-leg Shield Hydraulic Support Based on Its Force Equilibrium Zone | |
| Lichuang Liang, Hui Zheng |
| Golf Clubhead Optimization Based on Contribution of Eigenmodes | |
| Zhiqiang Wu, Yuji Sogabe, Yutaka Arimitsu |
| Topological optimization of anisotropic thermal structure based on meshless method and RAMP model | |
| Jianping Zhang, Shusen Wang, Shuguang Gong, Guilan Xie, Guoqiang Zhou |
| Plate/Shell Topology Optimization with Buckling and Frequency Constraints Based on Independent Continuous Mapping Method | |
| Hongling Ye, Weiwei Wang, Yunkang Sui |
| A metamodel updating strategy for multi-objective optimization with expensive simulation models | |
| Fengling Gao, Yingchun Bai, Cheng Lin |
| Optimum design of slender and tall wind turbine tower for residual vibration reduction | |
| Yinan Lu, Gengdong Cheng |
MS-045 Computational Biomechanics
| Influences of exercise durations on the dynamic bone-repair process by coupling polymer scaffold degradation and bone formation | |
| Qiang Chen |
| A study on the mechanical property and permeability of porous hierarchical bone scaffold | |
| Ce Chen |
| Effectsof boundary on biofilm morphogenesis | |
| Cheng Zhang, Bo Li, Jing-Ying Tang, Xi-Qiao Feng |
| Study on the effects of the psoas major muscle and facet joint orientation on the intradiscal stress of the lumbar spine | |
| chen shuo |
MS-046 Advanced solution methods for nonlinear problems in engineering
| Asymptotic and Numerical Investigations on Shallow Hydraulic fractures | |
| Zhiqiao Wang |
MS-048 Numerical Analysis in Earthquake Engineering Geology
| 2-D Numerical Simulation of Grounded Electrical-source Airborne Transient Electromagnetic Exploration based on Meshfree Method | |
| Tingzhe Huang |
| Viscous modeling of liquefaction-induced settlement of existing structures using dynamic mesh | |
| Wuwei Mao |
| Static and dynamic reliability analysis of laterally loaded piles using probability density evolution approach | |
| Min Xiong |
| Stability analysis of landfills based on SPH simulation | |
| Yangjuan Bao |
| Seismic responses of high-rise intake towers considering multiple-support excitation effects | |
| Hanyun Zhang |
MS-049 The prediction method for strength and fatigue behavior of composite materials
| Failure analysis of laminated tubes under tension-torsion biaxial loading | |
| Jingmeng Weng |
| Static mechanical properties test of 3 dimensional and 4 direction braid angle composite materials | |
| Xu yibing |
MS-050 Advances in phase-field modeling of microstructural dynamics in advanced materials
| Phase field model for stress evolution in an arbitrarily shaped elastoplastic electrode during two-phase lithiation | |
| yuyang lu |
| Phase field modeling of ferroelectric material with isogeometric analysis | |
| Chang Liu |
MS-051 Structural uncertainty analysis
| Interval field model and interval finite element analysis | |
| Chao Jiang, Bingyu Ni |
| Fuzzy static analysis of engineering structures involving functionally graded materials | |
| Di Wu, Airong Liu, Wei Gao |
| Isogeometric method of stochastic mechanical analysis of structures | |
| Wenpei Wang |
| Exact solutions of random vibration responses for rectangular thin plate | |
| Dixiong Yang |
| Analysis of hydraulic massive concrete structures using stochastic finite element method | |
| JING CHENG, Peicong Li, Fanxuan Meng, Jinpeng Wei |
MS-053 Damage modeling of engineering structures: from localized cracking to structural collapse
| Numerical simulation for compression failure of bimaterial interface by using cohesive zone model | |
| Liya Liu |
MS-054 Coupled thermal-mechanical computation for high-temperature materials
| Theoretical models on the fracture strengths of ceramic single crystal fibers at different temperatures and test rates | |
| Jiaxing Shao, Weiguo Li, Ruzhuan Wang, Yong Deng, Jianzuo Ma |
| The Theoretical Calculation and Numerical Simulation for Thermal Stress Generated in TGO Subjected to Cycled Thermal-Mechanical Loading | |
| Ding Jun |
| Theoretical computation on the critical resolved shear stress of metals at different temperatures in pure shear mode | |
| Jianzuo Ma, Weiguo Li, Peiji Geng, Xuyao Zhang, Ying Li, Yong Deng |
| Modeling of Temperature-dependent Shear Modulus of Bulk Metallic Glasses | |
| Xianhe Zhang, Weiguo Li, Peiji Geng, Ying Li |
| Theoretical prediction on temperature-dependent non-steady-state first matrix cracking stress for fiber reinforced ceramic composites | |
| Yong Deng, Weiguo Li, Xuyao Zhang |
| Determining fracture strength and critical flaw of the ZrB2–SiC composites on high temperature oxidation using theoretical method | |
| Ruzhuan Wang |
MS-055 Numerical Methods Based Unstructured Meshes and Their Applications in Engineering
| Stable node-based smoothed finite element method: application to multiple physical problems | |
| Cui Xiangyang |
| Extended finite element method with gradient weighted technique for fracture analysis | |
| Feng shi zhe |
| Analysis of complex structural-acoustic systems using a coupled smoothed finite element formulation | |
| Xin Hu |
| Gradient weighted finite element method for high computational accuracy of thermal mechanical problems | |
| Li zi chao |
| A four-noded triangular (Tr4) element for solid mechanics problems with curved boundaries | |
| Junhong Yue, G.R. Liu, R.P. Niu, Ming Li |
| An edge-based smoothed finite element method (ES-FEM) for electromagnetic field computations | |
| Shaw Li |
| Band structure simulation of elastic waves in phononic crystals by a stable node-based smoothed finite element method | |
| Gang Wang |
MS-056 Optimal design of smart structures for vibration control
| The multi-objective optimal design of semi-active controllers for vehicle suspensions with Magnetorheological damper | |
| Guiping Liu |
MS-057 Analysis and Design Methods of Building Structures Located in Earthquake Areas
| Seismic design loads of truss arch frames supported by RC columns with ceilings subjected to vertical and horizontal earthquake motions | |
| Koichiro Ishikawa |
| Structural concept of system of combined foundation designed for buildings located in earthquake areas | |
| Janusz Rębielak |
MS-059 Advances in Semi-analytical numerical methods
| Improved Hybrid Displacement Function (IHDF) element method for solving edge effect problem of plate/shell structure | |
| Yan Shang |
| A Numerical Method for the jerk of Structural Dynamic Response | |
| Ji-qing Xu, Yanting Li |
| Treffz Method for Micromechanical Modeling of Nanocomposites Considering Interface Effects | |
| Junbo Wang, Leiting Dong |
| Adomian Decomposition Method for First Order Partial Differential Equations | |
| Tzon-Tzer Lu |
| About control of convection intensity in chemical active equilibrium gas | |
| Igor Palymskiy |
| On boundary-value problems of elasticity theory with mixed boundary conditions | |
| Irina Vladimirovna Menshova, Mikhail Denisovich Kovalenko |
| Rectangle clamped at one end: Exact solution | |
| Alexander Petrovich Kerzhaev |
| Simulation of thermal field in concrete hydrostructures with a water pipe cooling system by the singular boundary method | |
| Hong Yong Xing |
| Micromechanical Modeling of Heterogeneous Materials by Computational Grains | |
| Leiting Dong |
MS-060 Computational Mechanics of Functional Materials and Structures
| Transient thermal response of a functionally graded piezoelectric laminate with a crack normal to the bimaterial interface | |
| Yoshihisa Nakaue, Sei Ueda |
| First-Principles Study on Adhesive Strength between Metal Layer and Silane Coupling Agents | |
| Masahiro Minamiyama, Yasutomo Uetsuji |
| A finite element method used for contact analysis of rolling bearings | |
| Shuting Li |
| Contact-induced folding of inhomogeneous arches | |
| Takuya Morimoto, Kai Tanaka, Fumihiro Ashida |
| Modeling microstructure of solid foam using random Kelvin open-cells – Influence of boundary parameters and cell strut cross-section | |
| Guangfa Gao, Pei Li, Yangbo Guo, Victor P.W. Shim |
| Characteristics of the guided evanescent waves in functionally graded cylindrical curved plates | |
| Xiaoming Zhang, Anru Gao, Jiangong Yu |
| Analysis of an interface crack in two-dimensional piezoelectric materials under impact loading | |
| ruifeng Zhang, chuanbing Yu, cunfa Gao |
| Analysis of the stress field and effective shear modulus of porous structures containing periodic holes with surface effects in anti-plane shear | |
| haibing yang, shuang wang, cunfa gao |
| Effect of different electric inclusions on large electrocaloric effect in ferroelectric nanoparticle | |
| Cheng Huang, Yu-Hao Li, Cun-Fa Gao |
| Elliptic inhomogeneity problem in thermoelectric medium | |
| Haopeng Song |
| Origami assembly of three dimensional metallic structures and their applications | |
| Yan Shi, Luqiao Qi, Cunfa Gao |
| Automatic voxel-based generation of 2D microstructural FE models and its application to microstructural analysis of composites | |
| Hai Qing |
| Numerical simulation of stress oscillation in a functionally graded piezoelectric thin plate | |
| Fumihiro Ashida, Takuya Morimoto |
| Analytiacl Solution for Sandwiches Cantilever Beam | |
| ZHEN WANG, Yuejin Niu |
| Elastic-Plastic Interaction of a Griffith Crack with a Circular Inclusion and Nearby Edge Dislocation | |
| Mu Fan, C. F. Gao |
| Phase field simulation of temperature dependent dielectric and piezoelectric properties in BaTiO3 polycrystalline ceramics: potentials of temperature energy harvesting | |
| Fumio Narita |
| On the receding contact between a homogeneous elastic layer and a half-plane substrate coated with functionally graded materials | |
| Changwen Mi |
MS-061 Structural integrity and fracture mechanics
| Numerical investigations on the effects of T-stress in creep crack | |
| Yanwei Dai, Yinghua Liu |
MS-062 Stochastic Modeling and Uncertainties in Computational Mechanics of Materials
| Crack Propagation Mode and Stress Localization in Staggered Biomaterials | |
| Yi YAN, Akihiro NAKATANI |
| Probabilistic fracture toughness prediction of composite materials | |
| Yan Li, Min Zhou |
MS-063 Model and Simulation for Advanced Manufacturing
| Simulation of Ceramic Grinding Process Based on Discrete Element Method | |
| Yuanqiang Tan |
| Equivalent Thermal Conductivity of Metal Powder Beds in 3D Printing | |
| Yuntian Feng, Yuanqiang Tan |
| Optimizing the Geometric Parameters of Cutting Edge for Finishing Machining of 30Cr2Ni4MoV Alloy Steel | |
| Bicheng Guo, Feng Jiang, Tongkai Liao, Fuzeng Wang, Lan Yan |
MS-064 Particle Methods and Their Applications in Engineering
| The application of SPH-GPU to the structure taxing on the water | |
| lu wang |
| Numerical Investigation of Martian Entry Vehicles Aerodynamics for Hypersonic Rarefied Conditions | |
| Fei Huang, Xiao-wen Liu, Xu-hong Jin |
MS-065 Computational Marine Hydrodynamics
| Numerical prediction and analysis of motion response of high speed planing craft in regular waves | |
| Hongjie Ling |
| Numerical simulation of turbulent flows in a channel with a series of groynes by ZDES | |
| jingxin zhang |
| The fully coupled effects of FPSO with different filling ratio tanks in CFD method | |
| Yuan Zhuang, Decheng Wan |
| GPU Acceleration of MPS for Three-Dimensional Sloshing | |
| Xiang Chen, Decheng Wan |
| Numerical investigation of open water performance of hybrid CRP podded propulsion system | |
| Dongya He, Decheng Wan |
| Effects of wave steepness on wave breaking properties over submerged reef | |
| Ke Xia, Decheng Wan |
| Numerical Study of Riser Vibration Due to Top-End Platform Motion | |
| Bowen Fu, Decheng Wan |
| Unsteady Aerodynamic Simulation of Offshore Wind Turbines with Wave-wind Interaction | |
| Ping Cheng, Decheng Wan |
| Breaking Wave Simulations of High-speed Surface Combatant using OpenFOAM | |
| Decheng Wan |
| Three-dimensional Simulation of Liquid Sloshing in an Elastic Tank | |
| Youlin Zhang, Decheng Wan |
| Numerical Simulation of Regular Waves onto a Vertical Circular Cylinder | |
| Zhenghao Liu, Decheng Wan |
| An adaptive control dynamic-grids generation method for numerical simulation of moving and deforming boundary flow field | |
| Zeyu Guo |
| Simulation of Vortex-Induced Vibration for a Long and Flexible Riser Using Discrete Vortex Method | |
| lin ke, Wang Jia Song |
MS-066 State-of-the-art modeling on discrete element simulation
| Numerical simulation of dynamic particle focusing for multi-particle suspensions | |
| Hirotake Udono, Mikio Sakai |
| The Development of Advanced DEM-based Hybrid Models for Particulate Systems | |
| Chuan-Yu Wu |
| Study on discrete element simulations for the industrial applications | |
| Mikio Sakai |
| Numerical study on die filling process by the DEM-CFD method | |
| Huaqin Yao, Mikio Sakai |
| CFD-DEM Study of the Effect of Cyclone Arrangements on the Gas-solid Flow Dynamics in the Full-loop Circulating Fluidized Bed | |
| Shuai Wang, Kun Luo, Junjie Lin, Chenshu Hu, Jianren Fan |
| Numerical study of hydrodynamics and heat transfer in a spouted bed | |
| junjie lin |
| Evaluation of contact force models for ellipsoidal particles | |
| Kejun Dong, Kamyar Kildashti, Bijan Samali |
| A Numerical Approach for Softening and Melting of Particles in Packed Beds | |
| Wenjing Yang, Zongyan Zhou |
| Discrete simulation of multi-phase flow of MEMS-based solid propellant microthruster | |
| Wenjing Yang |
| A Linkage between Particle- and Cell-scale Drag Correlations for Packed Beds of Multi-sized Particles | |
| Liangwan Rong, Kejun Dong, Aibing Yu |
MS-070 Advances in Numerical Methods for Multiple Inclusion Problems
| Development of a three-dimensional volume integral equation method | |
| Jungki Lee |
MS-073 Computational fatigue and fracture mechanics performance
| On the foreign object damage based fatigue mechanism of high-speed railway axles | |
| Y Luo, S.C. Wu, Z.W. Xu, Z.X. Zhang, Z.W. Li |
| Residual life assessment of incomplete fusion defects in welded bogie frame based on fracture mechanics | |
| Hao Duan, SC Wu |
| Synchrotron X-ray tomography based defect tolerance of additively manufactured Ti-6Al-4V | |
| Zhe Song, S.C. Wu, J Zhang |
| About the damage tolerance of railway axles under compressive residual stress | |
| Zhong Wei Xu, S.C. Wu |
| On the defect tolerance based fatigue crack growth life prediction of railway axles | |
| yuxuan Liu, S.C. WU |
| On the low cycle fatigue performance of 7050-T7451 aluminum alloy hybrid laser welded joints | |
| Ya'nan Hu |
| The virtual node polygonal element method for fatigue crack growth simulation | |
| zihao teng |
| Fatigue Life Prediction Based on AMPS Stress-Life Approach Fatigue FEA | |
| Yu Hou |
| A novel methodology of calculating general SCF for fatigue analysis of overlapped leg joints in offshore structures | |
| Jian Zhang |
| A novel singular element for analysis of stress-dimensional singular stress fields at circular crack fronts | |
| Xuecheng Ping, Chunguang Wang, Lipeng Cheng |
| Numerical simulation of dynamic brittle crack propagation using the singular edge-based smoothed finite element method | |
| Haodong Chen |
MS-074 Fast Computational Methods for Structural Optimization and Design
| Fast Analysis and Reanalysis for Structures with Nonlinear Supports | |
| Guanxin Huang, Zhijun Yang, Xin Chen |
| State of the art-Reanalysis: recent development review | |
| Hu Wang |
| GPU parallel computation of topology optimization based on EFG method | |
| Gong Shuguang, Xie Guilan, LU Haishan |
| Linear Dynamic Reanalysis Using Frequency-Shift Combined Approximations | |
| Guikai Guo, Fei Cheng |
| Simplified and fast modeling of automotive body frame | |
| Chungyang Gui, Wenjie Zuo |
| A Reanalysis based Fast Analysis method for Crack Propagation by using X-FEM | |
| Zhenxing Cheng, Hu Wang |
| Reanalysis based Approximate Bayesian Computation for Inverse Heat Conduction Problem | |
| Yang Zeng |
MS-076 Advanced in numerical simulation based structural damage detection in Engineering
| A damage localization method based on the singular value decomposition (SVD) for composite plates: numerical studies | |
| Zhi-Bo Yang |
| A new delamination identification method based on Kullback-Leibler divergence in composites | |
| shaohua tian |
| Studying Mechanical Properties of Wing Blade with Hole Based on Reverse Engineering | |
| Heng Cai, Chenchen Chu |
| Sparse representation for the impact force acting on composite structures | |
| Baijie Qiao |
| Fatigue life prediction in plate structure based on crack propagation | |
| Ahui Yuan, Jiawei Xiang |
| CFD Simulation for Water Pipe Penetration through walls in case of Fire | |
| George, Xiangguo XU, Zhengwei GE, s.c. wu |
MS-077 Engineering Inverse Problems: theory and numerical methods
| An Integrated Framework for Uncertainty Propagation with Hybrid Uncertain Variables based on Dimension-reduction Method | |
| Yu Zhongbo |
| Parameter identification for high-fidelity simulation | |
| cao lixiong |
| The Identification of the Constitutive Model Parameters of White Matter of Brain Tissue | |
| Qiming Liu |
| Identification of discrete element model parameters of brittle material by an inverse approach | |
| Rui Chen |
MS-100 Advanced Computations in Engineering Science (by invitation only)
| Establishing structure-function relationship for molecular sieving: Dissipative particle dynamics simulations of DNA polymer | |
| Xiangyang Gao |
| Delamination and matrix cracking in L-shaped cross-ply composite laminates under four-point bending | |
| Q.F. Duan, Dongfeng cao |
| Identification of Voids Using Topological Derivative and Level Set Method | |
| Xuan Li Zhang, Gang Yang, Dean Hu |
| An edge-based smoothed finite element method (ES-FEM) for acoustic problems using four-node quadrilateral elements | |
| Wei Li, Xiangyu You, Yingbin Chai, Ming Lei |
| A small strain constitutive model for shape memory polymers | |
| Xiaobin Su, Xiongqi Peng |
| From meshfree PIM to smoothed PIM (S-PIM) and smoothed FEM (S-FEM): an overview on the development of meshfree methods at ACES | |
| Guiyong Zhang |
| Evidence-theory-based epistemic uncertainty modeling and reliability analysis | |
| Hu Wang, Chao Jiang |
| Particle modeling at ACES in two decades | |
| Moubin Liu |
| ACES endeavours in modelling for nanos, bios, and multidisciplinary systems | |
| Yuan Cheng |
| Striving for ACES solutions to complex systems: fluid dynamics, fluid-structure interactions, and multiphysics coupling | |
| Zhi-Qian Zhang |
| Optimization, reliability analysis and inverse methods from the big tree of ACES | |
| Hu Wang |
Publication On e-Proceedings Only
| Application of anisotropic Hyperelastic constitutive model in finite element analysis of flexible deformable bump | |
| Ying Xiang |
| The Application of Data Mining in Health Care Informatics | |
| Weidong Mao, Hanhun Hu, Fengjie Sun |
| Research on failure strength of composites bolted joints under temperature condition | |
| hongyan wang |
| Biot’s Consolidation analysis using the node-based smoothed point interpolation method (NS-PIM) | |
| Shiyang Pan, Tongchun Li, Jing Cheng, Ping Yuan, Xinyang Ning |
| Analysis and Experimental validation of free vibration of the Reissner-Mindlin Plates based on ES-FEM. | |
| Fei Wu |
| A Correspondence between Errors and Pseudo-errors of Approximate Computations with Similar Rates of Convergence | |
| Aram Soroushian |
| Effect of slit inclusions in drag reduction of Flow over square cylinders for low Reynolds number in the laminar regime. | |
| Rohit Bhattacharya |
| An Improved Algorithm for Clustering | |
| Tsan-Jung He, Zhao-Yu Wang, Shie-Jue Lee, Shing-Tai Pan |
| Two-Dimensional Unsteady Flow Calculations of a Five Bladed Vertical Axis Wind Turbine | |
| Nishant Mishra, Praveen Laws, Rajagopal Vinod Bethi, Santanu Mitra |
| A state space boundary element method with analytical nearly singular integral formulation | |
| Changzheng Cheng, Zhilin Han, Meng Wu, Zhongrong Niu, Hongyu Sheng |
| Solving nonlinear singular boundary value problems using a newly constructed scaling function | |
| Yanan Liu |
| Multi-Field Coupled Simulation of Aqueous Humor in Rabbit Eye | |
| hongfang song |
| A Non-standard Finite Difference Method for a Class of Nonlinear Reaction-Diffusion Equations with Variable Coefficient | |
| Sun G.F. |
| Smoothed finite element methods for solving 3D steady and transient | |
| Ruiping Niu, G.R. Liu, J.H. Yue |
| Development of the advanced software package based on S-FEM | |
| Ruiping Niu, J.F. Zhang, J.H. Yue, Y. Li |
| A general way to construct a new optimal scheme with eighth-order convergence for nonlinear equations | |
| Ramandeep Behl, Changbum Chun, Ali Saleh Alshomrani, Sandile S Motsa |
| Young's modulus determination of the collagen molecule via steered molecular dynamics simulations | |
| haibin ge |
| An efficient class of fourth-order Jarratt-type methods for nonlinear equations | |
| Munish Kansal |
| Research on Pipe Vibration Analysis and Optimal Supporter Arrangement | |
| Long Yu |
| A development of SPH model for simulating surface erosion by impact(s) of single irregular-shaped particles | |
| Xiangwei Dong |
| Research on US-MRI fusion scheme based on non-negative matrix factorization and dual modality contrast agent | |
| Hou Mo |
| REVIEW OF PRECISE TIME INTEGRATION METHOD AND ITS DERIVED FORMATS | |
| Jay Wu, Ling Hongjie |
| Research on motion response of wind turbine installation vessel in navigation | |
| Yanan Huang |
| Computational Hemodynamics for a Pair of Intracranial Aneurysms Treated with Flow Diverting Stents | |
| Shengzhang Wang |
| Analytical Computation for Turbulence and Enstrophy in the Taylor Green Vortex Model | |
| Kaveh Fardipour, Kamyar Mansour |
| Optimized Compact Scheme with High Order of Accuracy Using Maximum Norm | |
| Kaveh Fardipour, Kamyar Mansour |