Track Policies

Plenary Speaker & Thematic Plenary Speaker

Directors
  • GR Liu, ICCM Conference Chairman
Checked Open Submissions Checked Peer Reviewed

MS-000 General Papers

If you do not have a prefered MS or could not find a proper one at this moment, you may simply submit your abastract/paper here. The conference Chairmen will assign your submission to a MS or a Session for presentation later.

Directors
  • Shaofan Li, University of California at Berkeley
  • GR Liu, ICCM Conference Chairman
Checked Open Submissions Checked Peer Reviewed

MS-001 Theory and Formulation for Novel Computational Methods

Welcome all papers on theory and basic formulations for novel computational methods

Directors
  • GR Liu, ICCM Conference Chairman
Checked Open Submissions Checked Peer Reviewed

MS-002 Advanced Computational Modelling of Fracture and Damage

Directors
  • Raj Das, RMIT University
Checked Open Submissions Checked Peer Reviewed

MS-003 Modelling and Simulation on Nanomechanics

Directors
  • Hengan Wu, University of Science and Technology of China
Checked Open Submissions Checked Peer Reviewed

MS-004 Computational Methods and Applications in Geoscience & Engineering

Directors
  • Yu Huang, Tongji University
Checked Open Submissions Checked Peer Reviewed

MS-005 Medical Rapidprototyping and Tissue Engineering

Directors
  • Abhaykumar Kuthe, Visvesvaraya National Institute of Technology
Checked Open Submissions Checked Peer Reviewed

MS-006 Computational Methods in Engineering

Directors
  • Songying Chen, Shandong University
  • Zhao Zhang, Dalian University of Technology
Checked Open Submissions Checked Peer Reviewed

MS-007 Fracture Modeling in Functional and Multifield Smart Materials and Structures

Directors
  • Tinh Quoc Bui, Tokyo Institute of Technology
  • Sohichi Hirose, Tokyo Institute of Technology
  • Chuanzeng Zhang, Universitat Siegen
Checked Open Submissions Checked Peer Reviewed

MS-008 Parallel and other high performance computing in the solution of partial differential equations

Directors
  • Ismael Herrera, National Autonomous University of Mexico
Checked Open Submissions Checked Peer Reviewed

MS-009 Computational Modelling of Multi-Uncertainty and Multi-Scale Problems

Directors
  • Chenfeng Li, Swansea University
Checked Open Submissions Checked Peer Reviewed

MS-010 Particle Based Methods

Directors
  • Zhen Chen, University of Missouri
  • Yan Liu, Tsinghua University
  • Dongdong Wang, Xiamen University
  • Xiong Zhang, Tsinghua University
Checked Open Submissions Checked Peer Reviewed

MS-011 Large Scale Coupled Problems and Related Topics

Directors
  • Hiroshi Kanayama, Japan Women's University
  • Masao Ogino, Daido University
  • Ryuji Shioya, Toyo University
Checked Open Submissions Checked Peer Reviewed

MS-012 Multiscale and Multiphysics Modelling for Complex Materials

Directors
  • Trovalusci a_Patrizia, Sapienza Università Di Roma
  • Schrefler b_Bernhard, University of Padua
Checked Open Submissions Checked Peer Reviewed

MS-013 Orthopaedic Biomechanics and Mechano- Biology

Directors
  • Lihai Zhang, University of Melbourne
Checked Open Submissions Checked Peer Reviewed

MS-014 Computational Modelling in Material Processing

Directors
  • Cho-Pei Jiang, National Formosa University
Checked Open Submissions Checked Peer Reviewed

MS-015 Advanced Computational Methods in Underwater Acoustics

Directors
  • Wei Li, Huazhong University of Science and Technology
Checked Open Submissions Checked Peer Reviewed

MS-016 Reconstruction and Extrapolation of N-dimensional Data

Directors
  • Dariusz Jakobczak, Koszalin University of Technology
Checked Open Submissions Checked Peer Reviewed

MS-017 Modelling and Characterisation of Mechanical Behaviour of Advanced Materials

Directors
  • Liguo Zhao, Loughborough University
Checked Open Submissions Checked Peer Reviewed

MS-018 Application and theory of mesh-free methods engineering and scientific problems

Directors
  • Edward Kansa, Convergent Solutions
Checked Open Submissions Checked Peer Reviewed

MS-019 New Horizons in FEM Analysis for Mechatronics in the Medical Applications

Directors
  • Francesco Mammoliti, University of Catania and Istituto Nazionale di Fisica Nucleare
  • Francesco Noto, Istituto Nazionale Fisica Nuclerare - Laboratori Nazionali del Sud and University of Catania
Checked Open Submissions Checked Peer Reviewed

MS-020 Computational Methods for Intelligent Systems

Directors
  • GR Liu, ICCM Conference Chairman
Checked Open Submissions Checked Peer Reviewed

MS-021 Computational Methods for Internet, networks and Security

Directors
  • GR Liu, ICCM Conference Chairman
Checked Open Submissions Checked Peer Reviewed

MS-022 Software Development and Coding Techniques

Directors
  • GR Liu, ICCM Conference Chairman
Checked Open Submissions Checked Peer Reviewed

MS-023 Computational Methods for Big-Data

Directors
  • GR Liu, ICCM Conference Chairman
Checked Open Submissions Checked Peer Reviewed

MS-024 Computational Methods for Images, Graphics, and 4D-Data

Directors
  • GR Liu, ICCM Conference Chairman
Checked Open Submissions Checked Peer Reviewed

MS-025 Computational Methods for Business Operations

Directors
  • GR Liu, ICCM Conference Chairman
Checked Open Submissions Checked Peer Reviewed

MS-026 Numerical Modelling of Composite Structures Subjected to Extreme Loading Conditions

Directors
  • Zhongwei Guan, University of Liverpool
Checked Open Submissions Checked Peer Reviewed

MS-027 Computational Methods for Sound and Vibration

Directors
  • Heow-Pueh LEE, National University of Singapore
  • Kian Meng Lim, National University of Singapore
Checked Open Submissions Checked Peer Reviewed

MS-028 Phase-field Method: Theory, Algorithm and Application

Directors
  • Lei Chen, University of Michigan-Dearborn
  • Yijia Gu, Alcoa
Checked Open Submissions Checked Peer Reviewed

MS-029 Methods for Multi-Phase Flows

Directors
  • Dia Zeidan, German Jordanian University
Checked Open Submissions Checked Peer Reviewed

MS-030 Computational Acoustics and Elastodynamics in Solids and Structures

Directors
  • Weiqiu Chen, Zhejiang University
  • Yue-Sheng Wang, Tianjin University/ Beijing Jiaotong University
  • Chuanzeng Zhang, Universitat Siegen
Checked Open Submissions Checked Peer Reviewed

MS-031 Numerical modelling of solar enhanced combustion and gasification

Directors
  • Zhao Tian, University of Adelaide
Checked Open Submissions Checked Peer Reviewed

MS-032 DE-FEM and it's application

Directors
  • Mengyan Zang, South China University of Technology
Checked Open Submissions Checked Peer Reviewed

MS-033 Fluid-Structure Interaction and Multiphysics Problems in Aerospace Engineering

Directors
  • Jianyao Yao, Chongqing University
Checked Open Submissions Checked Peer Reviewed

MS-034 Multiscale Modelling of Advanced Engineering Materials and Structures

Directors
  • Chunhui Yang, Western Sydney University
Checked Open Submissions Checked Peer Reviewed

MS-035 Application of metaheuristic algorithms to structural design and analysis

Directors
  • Y. Cengiz Toklu, Bilecik Şeyh Edebali University
Checked Open Submissions Checked Peer Reviewed

MS-036 Numerical methods for structural dynamics, control and health monitoring

Directors
  • Mohamed Hamdaoui, Université de Lorraine
  • Haijun Peng, Dalian University of Technology
  • Chao Xu, Northwestern Polytechnical University
Checked Open Submissions Checked Peer Reviewed

MS-037 Multilevel direct and iterative solvers for linear systems: theory and applications

Directors
  • Pieter Coulier, KU Leuven
  • Eric Darve, Stanford University
Checked Open Submissions Checked Peer Reviewed

MS-038 Computational Biomechanics of Musculoskeletal Tissues

Directors
  • Justin Fernandez, University of Auckland
  • Qing Li, The University of Sydney
Checked Open Submissions Checked Peer Reviewed

MS-039 Advanced Computational Methods for Soft Matters

Directors
  • Hua Li, Nanyang Technological University
Checked Open Submissions Checked Peer Reviewed

MS-040 Multi-scale Computational Mechanics for Heterogeneous Materials

Directors
  • Erick Saavedra Flores, Universidad de Santiago de Chile
Checked Open Submissions Checked Peer Reviewed

MS-041 Advances in Simulation for Marine and Offshore Applications

Directors
  • Ping Lu, American Bureau of Shipping
Checked Open Submissions Checked Peer Reviewed

MS-042 Recent Advances In Meshfree and Particle Methods

Directors
  • Bin Chen, Xi'an Jiaotong University
  • Seiichi Koshizuka, University of Tokyo
  • Moubin Liu, Peking University
Checked Open Submissions Checked Peer Reviewed

MS-043 Modeling and Simulation of Cellular Migration: from Molecules to Multiple Cells

Directors
  • Hiromi Miyoshi, RIKEN Center for Life Science Technologies
  • Ken-ichi Tsubota, Chiba University
Checked Open Submissions Checked Peer Reviewed

MS-044 Advances in the BEM and Other Related Mesh-Reduction Methods

Directors
  • Xiao-Wei Gao, Dalian University of Technology
  • Yijun Liu, Southern University of Science and Technology (SUSTech)
  • Naoshi Nishimura, Kyoto University
  • Wenjing Ye, Hong Kong University of Science and Technology
  • Jianming Zhang, Hunan University
Checked Open Submissions Checked Peer Reviewed

MS-045 Knowledge Based Artificial Intelligence Applied To Computer Aided Engineering

Directors
  • Pedro Marcal, Mpact Corp.
Checked Open Submissions Checked Peer Reviewed

MS-046 Smoothed Finite Element Methods: Theory and Applications

Directors
  • GR Liu, ICCM Conference Chairman
  • Yuki Onishi, Tokyo Institute of Technology
Checked Open Submissions Checked Peer Reviewed

MS-047 Innovative Techniques and their Applications to Fluid-Structure Interaction Problems

Directors
  • Rajeev Jaiman, National University of Singapore
  • Boo-Cheong Khoo, National University of Singapore
Checked Open Submissions Checked Peer Reviewed

MS-048 Advances in Numerical Methods for Multiple Inclusion Problems

Directors
  • Jungki Lee, Hongik University
Checked Open Submissions Checked Peer Reviewed

MS-049 Computational errors and their evaluation, from theory to engineering practice

Directors
  • Aram Soroushian, International Institute of Earthquake Engineering and Seismology
Checked Open Submissions Checked Peer Reviewed

MS-050 Multiphysics Computation and Applications

Directors
  • Shaofan Li, University of California at Berkeley
  • GR Liu, ICCM Conference Chairman
  • Dong Qian, The University of Texas at Dallas
Checked Open Submissions Checked Peer Reviewed

MS-051 Direct Methods: Computations and Applications

Directors
  • Canh Le, International University - VNU
Checked Open Submissions Checked Peer Reviewed

MS-052 Numerical Methods in Financial Engineering and Risk Management

Directors
  • Hong-Ming Yin, Washington State University
Checked Open Submissions Checked Peer Reviewed

MS-053 Stochastic Dynamic Analysis for Performance Based Engineering Approach

Directors
  • Umberto Alibrandi, National University of Singapore
Checked Open Submissions Checked Peer Reviewed

MS-054 Failure and instabilities in soft materials and geomaterials

Directors
  • Nikolaos Bouklas, The University of Texas at Austin
  • Christian Linder, Stanford University
  • WaiChing Sun, Columbia University
  • Joshua White, Lawrence Livermore National Laboratory
Checked Open Submissions Checked Peer Reviewed

MS-055 Structural uncertainty analysis and design

Directors
  • Wei Gao, University of New South Wales
  • Chao Jiang, Hunan University
  • Zhan Kang, Dalian University of Technology
Checked Open Submissions Checked Peer Reviewed

MS-056 Modeling and Characterization of Nanocomposites

Directors
  • Roham Rafiee, University of Tehran
Checked Open Submissions Checked Peer Reviewed

MS-057 Advanced modelling and simulation of linear and nonlinear dynamic systems

Directors
  • Zhicheng He, Hunan University
  • Quan Bing Eric Li, Teesside University
Checked Open Submissions Checked Peer Reviewed

MS-058 Computational Methods for Model Reduction and its Engineering Applications

Directors
  • Zhijie Xu, Pacific Northwest National Laboratory
  • Kejie Zhao, Purdue University
Checked Open Submissions Checked Peer Reviewed

MS-059 Theoretical and Computational Models for Additive Manufacturing

Directors
  • GR Liu, ICCM Conference Chairman
  • Sridhar Narayanaswamy, Institute of High Performance Computing
  • Zhi-Qian Zhang, Institute of High Performance Computing, A*STAR
Checked Open Submissions Checked Peer Reviewed

MS-060 CFD of turbulence for applied, industrial, or environmental flows

Directors
  • Lian Shen, University of Minnesota
  • Andres Tejada-Martinez, University of South Florida
Checked Open Submissions Checked Peer Reviewed

MS-061 Structural optimization methods and applications

Directors
  • Hongling Ye, Beijing University of Technology
Checked Open Submissions Checked Peer Reviewed

MS-062 Advanced Modeling and Simulation for Dynamics and Control

Directors
  • Zhiqin Cai, Dalian University of Technology
  • Qiang Gao, Dalian University of Technology
Checked Open Submissions Checked Peer Reviewed

MS-063 Computational modelling for environmental and water resources engineering applications

Directors
  • Adrian Wing-Keung Law, Nanyang Technological University
  • Kun Zhou, Nanyang Technological University
Checked Open Submissions Checked Peer Reviewed

MS-064 Structural damage by internal/external explosion

Directors
  • Sau Cheong Fan, Nanyang Technological University
Checked Open Submissions Checked Peer Reviewed

MS-065 Inverse problems in Engineering

Directors
  • Miao cUI, Dalian University of Technology
Checked Open Submissions Checked Peer Reviewed

MS-066 Uncertainty management approaches

Directors
  • GR Liu, ICCM Conference Chairman
Checked Open Submissions Checked Peer Reviewed

​MS-067 Methods for complex material and structural systems

Directors
  • GR Liu, ICCM Conference Chairman
Checked Open Submissions Checked Peer Reviewed


.explain-selected-button.explain-selected-text-selected-show-button { display: block !important; } .explain-selected-button.explain-selected-expanded { width: 400px; border: 0px; cursor: default; height: 350px; overflow: auto; box-shadow: rgba(15, 15, 15, 0.05) 0px 0px 0px 1px, rgba(15, 15, 15, 0.1) 0px 3px 6px, rgba(15, 15, 15, 0.2) 0px 9px 24px; } .explain-selected-button.explain-selected-circle:not(.explain-selected-expanded) { width: 35px; height: 35px; background: transparent; border-radius: 50%; opacity: 0.5; } .explain-selected-button.explain-selected-circle:not(.explain-selected-expanded):hover::before { content: ""; position: absolute; width: 35px; height: 35px; background-color: rgba(128, 0, 128, 0.5); border-radius: 50%; top: 50%; left: 50%; transform: translate(-50%, -50%); animation: explain-selected-growAndFade 2.0s ease-in-out; animation-iteration-count: infinite; } .explain-selected-button.explain-selected-circle:not(.explain-selected-expanded)::after { content: ""; position: absolute; width: 10px; height: 10px; background-color: rgb(128, 0, 128); top: 50%; left: 50%; transform: translate(-50%, -50%); border-radius: 50%; } .explain-selected-button.explain-selected-circle:not(.explain-selected-expanded):hover::after { width: 14px; height: 14px; } @keyframes explain-selected-growAndFade { 0% { width: 10px; height: 10px; opacity: 1; } 100% { width: 30px; height: 30px; opacity: 0; } } .explain-selected-button { display: none !important; width: 120px; height: 28px; border-radius: 4px; border: 0px; position: absolute; z-index: 9999; opacity: 1; cursor: pointer; background: white; text-align:left; font-family: Tahoma,Arial,Helvetica Neue,Helvetica,sans-serif; background-color: #fff; color: #333; } .swal2-icon-show-explainselected { border: none; } .swal2-container p { margin: 0 !important; } .explain-selected-button.explain-selected-text-selected-show-button { display: block !important; } .explain-selected-button.explain-selected-expanded { width: 400px; border: 0px; cursor: default; height: 350px; overflow: auto; box-shadow: rgba(15, 15, 15, 0.05) 0px 0px 0px 1px, rgba(15, 15, 15, 0.1) 0px 3px 6px, rgba(15, 15, 15, 0.2) 0px 9px 24px; } .explain-selected-button.explain-selected-circle:not(.explain-selected-expanded) { width: 35px; height: 35px; background: transparent; border-radius: 50%; opacity: 0.5; } .explain-selected-button.explain-selected-circle:not(.explain-selected-expanded):hover::before { content: ""; position: absolute; width: 35px; height: 35px; background-color: rgba(128, 0, 128, 0.5); border-radius: 50%; top: 50%; left: 50%; transform: translate(-50%, -50%); animation: explain-selected-growAndFade 2.0s ease-in-out; animation-iteration-count: infinite; } .explain-selected-button.explain-selected-circle:not(.explain-selected-expanded)::after { content: ""; position: absolute; width: 10px; height: 10px; background-color: rgb(128, 0, 128); top: 50%; left: 50%; transform: translate(-50%, -50%); border-radius: 50%; } .explain-selected-button.explain-selected-circle:not(.explain-selected-expanded):hover::after { width: 14px; height: 14px; } @keyframes explain-selected-growAndFade { 0% { width: 10px; height: 10px; opacity: 1; } 100% { width: 30px; height: 30px; opacity: 0; } } .explain-selected-button { display: none !important; width: 120px; height: 28px; border-radius: 4px; border: 0px; position: absolute; z-index: 9999; opacity: 1; cursor: pointer; background: white; text-align:left; font-family: Tahoma,Arial,Helvetica Neue,Helvetica,sans-serif; background-color: #fff; color: #333; } .swal2-icon-show-explainselected { border: none; } .swal2-container p { margin: 0 !important; } .explain-selected-button.explain-selected-text-selected-show-button { display: block !important; } .explain-selected-button.explain-selected-expanded { width: 400px; border: 0px; cursor: default; height: 350px; overflow: auto; box-shadow: rgba(15, 15, 15, 0.05) 0px 0px 0px 1px, rgba(15, 15, 15, 0.1) 0px 3px 6px, rgba(15, 15, 15, 0.2) 0px 9px 24px; } .explain-selected-button.explain-selected-circle:not(.explain-selected-expanded) { width: 35px; height: 35px; background: transparent; border-radius: 50%; opacity: 0.5; } .explain-selected-button.explain-selected-circle:not(.explain-selected-expanded):hover::before { content: ""; position: absolute; width: 35px; height: 35px; background-color: rgba(128, 0, 128, 0.5); border-radius: 50%; top: 50%; left: 50%; transform: translate(-50%, -50%); animation: explain-selected-growAndFade 2.0s ease-in-out; animation-iteration-count: infinite; } .explain-selected-button.explain-selected-circle:not(.explain-selected-expanded)::after { content: ""; position: absolute; width: 10px; height: 10px; background-color: rgb(128, 0, 128); top: 50%; left: 50%; transform: translate(-50%, -50%); border-radius: 50%; } .explain-selected-button.explain-selected-circle:not(.explain-selected-expanded):hover::after { width: 14px; height: 14px; } @keyframes explain-selected-growAndFade { 0% { width: 10px; height: 10px; opacity: 1; } 100% { width: 30px; height: 30px; opacity: 0; } } .explain-selected-button { display: none !important; width: 120px; height: 28px; border-radius: 4px; border: 0px; position: absolute; z-index: 9999; opacity: 1; cursor: pointer; background: white; text-align:left; font-family: Tahoma,Arial,Helvetica Neue,Helvetica,sans-serif; background-color: #fff; color: #333; } .swal2-icon-show-explainselected { border: none; } .swal2-container p { margin: 0 !important; } .explain-selected-button.explain-selected-text-selected-show-button { display: block !important; } .explain-selected-button.explain-selected-expanded { width: 400px; border: 0px; cursor: default; height: 350px; overflow: auto; box-shadow: rgba(15, 15, 15, 0.05) 0px 0px 0px 1px, rgba(15, 15, 15, 0.1) 0px 3px 6px, rgba(15, 15, 15, 0.2) 0px 9px 24px; } .explain-selected-button.explain-selected-circle:not(.explain-selected-expanded) { width: 35px; height: 35px; background: transparent; border-radius: 50%; opacity: 0.5; } .explain-selected-button.explain-selected-circle:not(.explain-selected-expanded):hover::before { content: ""; position: absolute; width: 35px; height: 35px; background-color: rgba(128, 0, 128, 0.5); border-radius: 50%; top: 50%; left: 50%; transform: translate(-50%, -50%); animation: explain-selected-growAndFade 2.0s ease-in-out; animation-iteration-count: infinite; } .explain-selected-button.explain-selected-circle:not(.explain-selected-expanded)::after { content: ""; position: absolute; width: 10px; height: 10px; background-color: rgb(128, 0, 128); top: 50%; left: 50%; transform: translate(-50%, -50%); border-radius: 50%; } .explain-selected-button.explain-selected-circle:not(.explain-selected-expanded):hover::after { width: 14px; height: 14px; } @keyframes explain-selected-growAndFade { 0% { width: 10px; height: 10px; opacity: 1; } 100% { width: 30px; height: 30px; opacity: 0; } } .explain-selected-button { display: none !important; width: 120px; height: 28px; border-radius: 4px; border: 0px; position: absolute; z-index: 9999; opacity: 1; cursor: pointer; background: white; text-align:left; font-family: Tahoma,Arial,Helvetica Neue,Helvetica,sans-serif; background-color: #fff; color: #333; } .swal2-icon-show-explainselected { border: none; } .swal2-container p { margin: 0 !important; } .explain-selected-button.explain-selected-text-selected-show-button { display: block !important; } .explain-selected-button.explain-selected-expanded { width: 400px; border: 0px; cursor: default; height: 350px; overflow: auto; box-shadow: rgba(15, 15, 15, 0.05) 0px 0px 0px 1px, rgba(15, 15, 15, 0.1) 0px 3px 6px, rgba(15, 15, 15, 0.2) 0px 9px 24px; } .explain-selected-button.explain-selected-circle:not(.explain-selected-expanded) { width: 35px; height: 35px; background: transparent; border-radius: 50%; opacity: 0.5; } .explain-selected-button.explain-selected-circle:not(.explain-selected-expanded):hover::before { content: ""; position: absolute; width: 35px; height: 35px; background-color: rgba(128, 0, 128, 0.5); border-radius: 50%; top: 50%; left: 50%; transform: translate(-50%, -50%); animation: explain-selected-growAndFade 2.0s ease-in-out; animation-iteration-count: infinite; } .explain-selected-button.explain-selected-circle:not(.explain-selected-expanded)::after { content: ""; position: absolute; width: 10px; height: 10px; background-color: rgb(128, 0, 128); top: 50%; left: 50%; transform: translate(-50%, -50%); border-radius: 50%; } .explain-selected-button.explain-selected-circle:not(.explain-selected-expanded):hover::after { width: 14px; height: 14px; } @keyframes explain-selected-growAndFade { 0% { width: 10px; height: 10px; opacity: 1; } 100% { width: 30px; height: 30px; opacity: 0; } } .explain-selected-button { display: none !important; width: 120px; height: 28px; border-radius: 4px; border: 0px; position: absolute; z-index: 9999; opacity: 1; cursor: pointer; background: white; text-align:left; font-family: Tahoma,Arial,Helvetica Neue,Helvetica,sans-serif; background-color: #fff; color: #333; } .swal2-icon-show-explainselected { border: none; } .swal2-container p { margin: 0 !important; } .explain-selected-button.explain-selected-text-selected-show-button { display: block !important; } .explain-selected-button.explain-selected-expanded { width: 400px; border: 0px; cursor: default; height: 350px; overflow: auto; box-shadow: rgba(15, 15, 15, 0.05) 0px 0px 0px 1px, rgba(15, 15, 15, 0.1) 0px 3px 6px, rgba(15, 15, 15, 0.2) 0px 9px 24px; } .explain-selected-button.explain-selected-circle:not(.explain-selected-expanded) { width: 35px; height: 35px; background: transparent; border-radius: 50%; opacity: 0.5; } .explain-selected-button.explain-selected-circle:not(.explain-selected-expanded):hover::before { content: ""; position: absolute; width: 35px; height: 35px; background-color: rgba(128, 0, 128, 0.5); border-radius: 50%; top: 50%; left: 50%; transform: translate(-50%, -50%); animation: explain-selected-growAndFade 2.0s ease-in-out; animation-iteration-count: infinite; } .explain-selected-button.explain-selected-circle:not(.explain-selected-expanded)::after { content: ""; position: absolute; width: 10px; height: 10px; background-color: rgb(128, 0, 128); top: 50%; left: 50%; transform: translate(-50%, -50%); border-radius: 50%; } .explain-selected-button.explain-selected-circle:not(.explain-selected-expanded):hover::after { width: 14px; height: 14px; } @keyframes explain-selected-growAndFade { 0% { width: 10px; height: 10px; opacity: 1; } 100% { width: 30px; height: 30px; opacity: 0; } } .explain-selected-button { display: none !important; width: 120px; height: 28px; border-radius: 4px; border: 0px; position: absolute; z-index: 9999; opacity: 1; cursor: pointer; background: white; text-align:left; font-family: Tahoma,Arial,Helvetica Neue,Helvetica,sans-serif; background-color: #fff; color: #333; } .swal2-icon-show-explainselected { border: none; } .swal2-container p { margin: 0 !important; }