Plenary Lecture & Thematic Plenary Lecture
| Computational Optimization for Biomechanics and Biomedical Engineering | |
| Qing Li |
| A frictional contact algorithm for implicit material point method | |
| Zhenpeng Chen, Xiong Zhang, Xinming Qiu, Yan Liu |
MS-000 General Papers
| A finite element model of crimped fibril reinforced composite to predict the mechanical response subjected to tensile load | |
| Li Liu, Dean Hu, Xu Han |
| Research on the biomechanics of lumbar muscles based on musculoskeletal model | |
| Xiaotong Zhan, Zhiyong Li, Qiang Chen |
| Computational Approach to Analyzing 3D Strain Distribution in Opaque Materials via Micro Computer Tomography | |
| Lingtao Mao, Haizhou Liu, Fu-pen Chiang |
| 3D Simulation of the Defect Generation by Hydrogen at $Si-SiO_2$ Interface | |
| Zhaocan Ma, Jingjie Xu, Hongliang Li, Yu Song, Linbo Zhang, Benzhuo Lu |
| A reduced-order modeling technique for nonlinear buckling analysis | |
| Ke Liang |
| The Cardinal spline methods for the numerical solution of nonlinear integral equations | |
| Xiaoyan Liu, Jiahuan Huang |
| A truss section size optimization design method based on constraint variation principle | |
| Yubin Liu, Xin Zheng, Shengjun Zhang, Feng Shen, Xiangrong Fu |
| Flutter frequency based on bending - torsion coupling theory | |
| Xin Zheng, Yu-Bin LIU, Pu CHEN, Feng SHEN, Sheng-Jun ZHANG, Xiang-Rong FU |
| Random walk of Brownian particles on non-uniform grids | |
| Jianwen Zhang, Zirui Li |
| CFD analysis of the heat transfer of fire doors under the standard time-temperature curve | |
| Hou-Kuan Tam, Hau-Yin Leung, Lap-Mou Tam, Seng-Kin Lao |
MS-001 Theory and Formulation for Novel Computational Methods
| Numerical methods for structural dynamic responses based on radial basis functions approximation | |
| Yanting Li, Jiqing Xu, Xibin Xu |
| Nystrom extrapolation algorithm for solving delay Volterra integral equations with weakly singular kernel | |
| li zhang, Jin Huang, Yubin Pan, Hongyan Liu |
| A Non-standard Finite-difference Scheme for a Burgers-Fisher Partial Differential Equation with Bounded Travelling-wave solutions | |
| G.F Sun, G.R Liu |
| Hybrid approximation spaces for solving compressible Navier-Stokes equations with high Reynolds number | |
| Fan Zhang, Jian Cheng, Tiegang Liu |
MS-004 Smoothed Finite Element Methods and Related Techniques
| Stability analysis of smoothed finite element method with explicit method for transient heat transfer | |
| Xin Rong, Ming Li, Ruiping Niu |
| A novel alpha smoothed finite elements method for ultra-accurate solution using quadrilateral elements | |
| yanhua li |
| A Characteristic based ES-FEM with Polynomial Pressure Projection for Incompressible flows | |
| Chen Jiang, Xu Han, G.R. Liu |
| A weakened weak (W2) form and a G space | |
| Ming Li |
MS-006 Modelling and Characterisation of Mechanical Behaviour of Advanced Materials
| Numerical calculation of material configurational force based on ABAQUS secondary development and its applications | |
| Yue Chen, Qun Li |
| Crack interacting with an individual hole by the fracture criterion of configurational force | |
| Bin Gu, Yuli Guo, Qun Li |
| Shakedown analysis of structures with temperature-dependent properties | |
| SHYUE-YUH LEU |
MS-007 Numerical modelling of nonlinear transient phenomena
| Investigation of dispersion effects in plates from a numerical point of view | |
| Piotr Kijanka, Pawel Packo, Rafal Radecki, Michael J. Leamy |
MS-008 Algorithms, Software and Applications of Large-Scale Computation
| Fourier transform analysis of convergence properties of MultiGrid V-cycle algorithms | |
| Yu Zhang, Ming Li, Guirong Liu |
| Large scale traffic evacuation simulation based on multi-agent modeling | |
| shuiping Yu, Shengcheng Yuan, Yi Liu, Jing Qian |
| Building Language Models with Fuzzy Weights | |
| Tsan-Jung He, Shie-Jue Lee, Chih-Hung Wu |
MS-009 Particle Based Methods
| Simulation of high-velocity impact process of 3D woven orthogonal composite from meso-scale point-based model | |
| Yan Liu, Xuena Si, Xiong Zhang |
| Accelerating Peridynamics Program Using GPU with CUDA and OpenACC | |
| J.X. Li, J.M. Zhao, F. Xu, Y.J. Liu |
| Time-discontinuous Material Point Method for Transient Problems involving Discontinuities in Stress | |
| Yonggang Zheng, Mengkai Lu, Jiayong Zhang, Hongwu Zhang, Zhen Chen |
| Simulation of hydraulic fracturing process by using peridynamics | |
| Shuhui Li, Fan Wu |
MS-012 Computational Modeling for Cardiovascular Disease and Biological Applications
| Numerical Simulation of Instantaneous Wave-Free Ratio of Stenosed Coronary Artery | |
| Wenxin Wang, Youjun Liu, Boyan Mao, Bao Li |
| A Segmentation Method for Intracoronary Optical Coherence Tomography (OCT) Image Based on Least Squares Support Vector Machine: Vulnerable Coronary Plaque Cap Thickness Quantification | |
| Xiaoya Guo, Dalin Tang, David Molony, Chun Yang, Habib Samady, Jie Zheng, Gary Mintz, Akiko Maehara, Liang Wang, Xuan Pei, Zhi-Yong Li, Genshan Ma, Don Giddens |
| Reproducibility of optical coherence tomography imaging based measurements of the fibrous cap thickness in lipid-enrich atheroma | |
| Chunliu He, Zhiyong Li, Jiaqiu Wang, Yuxiang Huang, Yuehong Miao, Tongjing Zhu |
| Effect of distal stenosis on the blood flow in right coronary arteries with serial stenoses | |
| Biyue Liu, Dalin Tang |
| An FSI modeling approach to combine IVUS and OCT for more accurate patient-specific coronary cap thickness and stress/strain calculations | |
| Xiaoya Guo, Don Giddens, David Molony, Chun Yang, Habib Samady, Jie Zheng, Gary Mintz, Akiko Maehara, Liang Wang, Xuan Pei, Zhi-Yong Li, Dalin Tang |
| The method of personalized lumped parameter model of coronary artery | |
| Bao Li, Wenxin Wang, Xi Zhao, Boyan Mao, Youjun Liu, Zhou Zhao |
| Geometric calibration based on a simple phantom for multi-lens microscopic CT | |
| Luo Shouhua, Xu Haitao, Zheng Liang, Zhang Xiaobing, Shen Tao |
| Hemodynamic effects of lesion length on competitive flow with internal mammary artery bypass | |
| Boyan Mao, Huixia Zhang, Wenxin Wang, Bao Li, Youjun Liu |
| Applying virtual stent deployment to study flow-diversion treatment for intracranial aneurysms: the effect of stent compaction on post-treatment wire configuration | |
| Mingzi Zhang, Yujie Li, David I. Verrelli, Winston Chong, Makoto Ohta, Yi Qian |
| Modelling flow-diverting stent as porous medium with different permeabilities in the treatment of intracranial aneurysms: a comparison of a successfully treated case and an unsuccessful one | |
| Yujie Li, Mingzi Zhang, David I. Verrelli, William Yang, Winston Chong, Makoto Ohta, Yi Qian |
| Impact of carotid bifurcation geometry on atherosclerotic formation: A hemodynamic study | |
| Xin-Ke Yao, Yan Cai, Jie Gao, Ge-Lin Xu, Zhi-Yong Li |
MS-013 Advances in BEM and Other Mesh-Reduction Methods
| Accelerating BEM in macromolecular electrostatics computing | |
| Benzhuo Lu |
| A double-layer interpolation boundary face method for potential problems in two dimensions | |
| Jianming Zhang, Weicheng Lin |
| Improved method of fundamental solutions in conjunction with kernel-independent fast multipole method for solving potential problems | |
| Zhuojia Fu, Junpi Li, Wen Chen |
| In-plane free vibration of circular and annular FG disks | |
| Yang Yang, Kun Pang Kou, Chi Chiu Lam |
| Shape optimization of acoustic structure using an isogeometric fast multipole boundary element method | |
| Haibo Chen, Cheng Liu, Wenchang Zhao |
| A FEM/BEM based topology optimization of submerged bi-material shell structures under harmonic excitations | |
| Wenchang Zhao, Leilei Chen, Cheng Liu, Haibo Chen |
| An application of fast multipole method to isogeometric boundary element method in two-dimensional acoustic problems | |
| Jie Wang, cheng liu, haibo chen |
| A new fast direct solver for the BEM | |
| Yijun Liu, Shuo Huang |
| Band Structures of Phononic Crystals with Defects Based on the Boundary Element Method | |
| Feng-lian Li |
MS-014 Modelling and Simulation of Complex Systems
| Mean Field Free Energy Functional of Electrolyte Solution with Non-homogenous BCs and the Generalized PB/PNP Equations | |
| Xuejiao Liu |
| Concept of dynamical traps in modeling human behavior | |
| Ihor Lubashevsky |
MS-015 Fluid-Structure Interaction and Multiphysics Problems in Aerospace Engineering
| Control of Energy Flow and Wave Propagation by Periodically Distributing Piezoelectric Materials with Identical Shunting Circuits | |
| Yu FAN, Lin Li, Olivier Bareille, Mohamed Ichchou |
MS-016 Multiscale modelling of damage and fracture in quasi-brittle materials
| Micromechanical Studies of Strain Rate Dependent Compressive Strength in Brittle Polycrystalline Materials | |
| Bo Li, Hao Jiang, Zongyue Fan |
MS-017 Computational errors and their evaluation
| Extrapolation Methods for Computing Supersingular Integral on a Circle | |
| Jin Li |
MS-018 Computational modeling and experimental characterization of soft tissues
| Calculation of unloaded configurations for finite element simulations of patient-specific geometries with application to human common carotid artery | |
| Xuhui Li, Mikhail Itskov, Mahmood Jabareen |
| Simulation of Biological Tissues using Numerical Hyperelasticity and Strain-Enriched Finite Element Analysis (Sefea) | |
| H. Theodore Lin |
MS-019 Large Scale Coupled Problems and Related Topics
| Parameters optimization of hydraulic fracturing for improving fracture complexity in shale reservoirs | |
| Chuang Liu |
| Performance evaluation of large-scale high-frequency electromagnetic field simulations using iterative substructuring methods | |
| LIJUN LIU, MASAO OGINO |
| A Quadric Stabilization Approach on Partitioned Fluid-Structure Interaction Algorithm | |
| Ming-Jian Li |
MS-022 Advanced modeling techniques and applications for polymer based additive manufacturing
| Development of a multi-phase viscoelastic solver for polymer based additive manufacturing simulation | |
| Jun Liu, Kelly Anderson, N. Sridhar |
MS-023 Numerical modelling of fibre reinforced composites under impact and blast
| Numerical modeling of a hybrid GFRP-concrete beam subjected to low-velocity impact loading | |
| Zongjun Li, Amar Khennane, Paul Jonathan Hazell, Alex Remennikov |
MS-024 Advanced Computational Methods for Soft Matters
| Buckling of interfacial layers in periodic cellular composite structures | |
| YuHao He, Rong Huang, Zishun Liu |
| Auxetic metamaterials of square structure | |
| Yu Zhou, Zishun LIU |
MS-025 Modelling and Simulation on Nanomechanics
| Strain rate and temperature dependent mechanical properties in CNT-reinforced magnesium composites | |
| Xia Zhou, Xiaoxia Liu, Mengqi Shen |
| Plastic deformation mechanism in gradient nanoscale grained iron via atomistic model coupled with crystal plasticity finite element simulations | |
| Jia Li |
MS-027 Multiscale and Multiphysics Modelling for Complex Materials
| Characterization of damage-healing-plasticity-breakage in multi-scale DEM-FEM modeling of granular material | |
| Xikui Li, Zenghui Wang, Qinglin Duan |
| A new multiscale computation method for geometrically nonlinear analysis of 3D fluid actuated cellular structures | |
| Jun Lv, Liang Zhang, Hongwu Zhang |
MS-028 Advanced Computational Methods for The Mechanical Modeling of Materials and Structures
| Some novel numerical applications of Cosserat continua | |
| Nicholas Fantuzzi, Lorenzo Leonetti, Patrizia Trovalusci, Francesco Tornabene |
MS-029 Computational Methods in Engineering
| Study of RFD Model Spectrum and the Characteristic Conversion Methods | |
| J.Y. Li, Hui Wang |
| Acoustic Characteristics of Three-dimensional Membrane-imbedded Acoustic Metamaterial | |
| Yang Li, Xiaoming Wang, Yulin Mei |
| Matrix acidizing analysis in fractured carbonate formations by using UPNM | |
| Yun Chen, Guo Wei Ma, Tuo Li, Yang Wang, Feng Ren |
| Investigation of Bridging Method to Predict Rarefied Aerodynamics of Lift Body | |
| Xiao-wen Liu, Guo-hui Dou, An-long Gong |
| Numerical solution of a bioheat transfer problem with transient blood temperature | |
| Kuo-Chi Liu, Fong-Jou Tu |
MS-032 Recent Advances in Meshfree and Particle Methods
| Two-dimensional SPH simulation of liquid sloshing in a rotating tank | |
| jiaru shao, Moubin Liu |
| A new formula for predicting the crater size of a target plate produced by hypervelocity impact | |
| zhilang Zhang, moubin Liu |
| Pressure control in dissipative particle dynamics and its application in simulating micro- and nano-bubbles | |
| Yuqing Lin, Jiaming Li, Dingyi Pan |
| Particle method simulation of violent sloshing under rotational excitation | |
| Min Luo, Chan Ghee Koh |
| The CCVMLS approximation and the envelop method | |
| D.M. Li |
| A novel velocity field correction method to reproduce wake effects in unresolved modeling of granular flows | |
| Zekun Wang, Khuram Walayat, Moubin Liu |
| A multigrid finite element fictitious boundary method for fluid-solid two-phase flows | |
| Khuram Walayat, Zekun Wang, Kamran Usman, Moubin Liu |
MS-033 Modelling and Simulation of Multifunctional Composite Materials
| Application of the improved equivalent static loads optimization theory on the crash condition of vehicle components | |
| QQ Li, Z. C. He, Tao Tao Chen, A. G. Cheng |
| Temperature influences on the performance of a dielectric elastomer generator with consideration of dissipation processes and failures | |
| Shoue Chen, Zhicheng He, Eric Li |
| An ultra-accurate algorithm in the design of fluid/solid and solid/fluid phononics crystals | |
| Eric Li |
| An acoustic pressure-based method for load identification in coupled structural-acoustic system with non-probabilistic uncertain variables | |
| Xinyou Lin |
MS-035 Computational ship mechanics: theory, numerical methods and engineering applications
| Smoothed point interpolation method (S-PIM): A brief history and recent developments | |
| Guiyong Zhang, Da Hui, Shuangqiang Wang, Huan Lu, Gui-Rong Liu |
| Numerical method for underwater explosion loads and the associated structure damage | |
| Rui Han, Yunlong Liu, Aman Zhang |
| Coupling immersed boundary-lattice Boltzmann method with smoothed point interpolation method for large-displacement fluid-structure interaction problems | |
| Shuangqiang Wang, Guiyong Zhang, Yunan Cai, Sheng Li, Jianhua Lu |
| Numerical Predictions of Hydrodynamic Forces and Squat of Ships in Confined Waters | |
| Yi Liu, Lu Zou, Zao-Jian Zou, Teng-Chao Lu |
| The Numerical Investigation on Hydrodynamic Performance of Twisted Rudder during Self-propulsion | |
| Cong Liu, Decheng Wan |
| Numerical modeling of bubbles near rigid boundary using OpenFOAM | |
| Shiping Wang, Tong Li, Aman Zhang |
| Numerical Simulation of Internal Flow Field Characteristics for a Ducted Propeller | |
| Jie Gong, Chunyu Guo, Tiecheng Wu, Kewei Song, Jianfeng Lin |
| Experimental and Numerical Study on the Wake Field of a 76000 DWT Panamax Bulker | |
| Tiecheng Wu, chunyu Guo, Wanzhen Luo, Jie Gong, Yongze Xu, Wenxuan She |
MS-036 Immersed boundary method for fluid structure interaction
| Computational Fluid Dynamic (CFD) method to simulate complex-structured soft-body locomotion using OpenFOAM | |
| Hui FENG, Peter TODD, Heow Pueh LEE |
MS-037 Nanoscale thermal transport and nanomechanics
| Invited: Thermal Transport in Graphene with Defect and Doping: Phonon Modes Analysis | |
| Shiqian Hu, Jie Chen, Nuo Yang, Baowen Li |
MS-038 Computational and experimental methods on additive manufacturing and related welding technologies
| Simulation analysis of Electron beam melting using a multi-scale model | |
| Pengwei Liu, Xiangyang Cui |
MS-041 Computational Methods in Acoustics and Elastodynamics
| A meshfree method for dynamic analysis of rotating thick plates with third-order shear deformation theory | |
| chaofan du, Dingguo Zhang, Guirong Liu |
| Acoustical Properties of the Composite Structures Made of Micro-Perforated Plates and Honeycomb Core | |
| Menglin Li, Fei Xu |
MS-042 Numerical modelling methods and applications in renewable energy flows
| Wind field simulation over complex terrain with isogeometric analysis | |
| Rafael Montenegro, J.M. Escobar, J.I. López, M. Brovka, A. Oliver, G. Montero, E. Rodríguez, G.V. Socorro-Marrero |
MS-044 Structural optimization method and application
| Design of lightest pyramidal lattice hollow truss structures with maximum sound insulation performance under random and interval uncertainties | |
| Jie Liu |
| Shape optimum design of shear panel damper made of low yield steel | |
| Yang LIU |
| Stability Optimization of A Two-leg Shield Hydraulic Support Based on Its Force Equilibrium Zone | |
| Lichuang Liang, Hui Zheng |
| A metamodel updating strategy for multi-objective optimization with expensive simulation models | |
| Fengling Gao, Yingchun Bai, Cheng Lin |
| Optimum design of slender and tall wind turbine tower for residual vibration reduction | |
| Yinan Lu, Gengdong Cheng |
MS-045 Computational Biomechanics
| Effectsof boundary on biofilm morphogenesis | |
| Cheng Zhang, Bo Li, Jing-Ying Tang, Xi-Qiao Feng |
MS-050 Advances in phase-field modeling of microstructural dynamics in advanced materials
| Phase field model for stress evolution in an arbitrarily shaped elastoplastic electrode during two-phase lithiation | |
| yuyang lu |
| Phase field modeling of ferroelectric material with isogeometric analysis | |
| Chang Liu |
MS-051 Structural uncertainty analysis
| Fuzzy static analysis of engineering structures involving functionally graded materials | |
| Di Wu, Airong Liu, Wei Gao |
| Analysis of hydraulic massive concrete structures using stochastic finite element method | |
| JING CHENG, Peicong Li, Fanxuan Meng, Jinpeng Wei |
MS-053 Damage modeling of engineering structures: from localized cracking to structural collapse
| Numerical simulation for compression failure of bimaterial interface by using cohesive zone model | |
| Liya Liu |
MS-054 Coupled thermal-mechanical computation for high-temperature materials
| Theoretical models on the fracture strengths of ceramic single crystal fibers at different temperatures and test rates | |
| Jiaxing Shao, Weiguo Li, Ruzhuan Wang, Yong Deng, Jianzuo Ma |
| Theoretical computation on the critical resolved shear stress of metals at different temperatures in pure shear mode | |
| Jianzuo Ma, Weiguo Li, Peiji Geng, Xuyao Zhang, Ying Li, Yong Deng |
| Modeling of Temperature-dependent Shear Modulus of Bulk Metallic Glasses | |
| Xianhe Zhang, Weiguo Li, Peiji Geng, Ying Li |
| Theoretical prediction on temperature-dependent non-steady-state first matrix cracking stress for fiber reinforced ceramic composites | |
| Yong Deng, Weiguo Li, Xuyao Zhang |
MS-055 Numerical Methods Based Unstructured Meshes and Their Applications in Engineering
| A four-noded triangular (Tr4) element for solid mechanics problems with curved boundaries | |
| Junhong Yue, G.R. Liu, R.P. Niu, Ming Li |
| An edge-based smoothed finite element method (ES-FEM) for electromagnetic field computations | |
| Shaw Li |
MS-056 Optimal design of smart structures for vibration control
| The multi-objective optimal design of semi-active controllers for vehicle suspensions with Magnetorheological damper | |
| Guiping Liu |
MS-059 Advances in Semi-analytical numerical methods
| A Numerical Method for the jerk of Structural Dynamic Response | |
| Ji-qing Xu, Yanting Li |
| Adomian Decomposition Method for First Order Partial Differential Equations | |
| Tzon-Tzer Lu |
MS-060 Computational Mechanics of Functional Materials and Structures
| A finite element method used for contact analysis of rolling bearings | |
| Shuting Li |
| Modeling microstructure of solid foam using random Kelvin open-cells – Influence of boundary parameters and cell strut cross-section | |
| Guangfa Gao, Pei Li, Yangbo Guo, Victor P.W. Shim |
| Effect of different electric inclusions on large electrocaloric effect in ferroelectric nanoparticle | |
| Cheng Huang, Yu-Hao Li, Cun-Fa Gao |
MS-061 Structural integrity and fracture mechanics
| Numerical investigations on the effects of T-stress in creep crack | |
| Yanwei Dai, Yinghua Liu |
MS-062 Stochastic Modeling and Uncertainties in Computational Mechanics of Materials
| Probabilistic fracture toughness prediction of composite materials | |
| Yan Li, Min Zhou |
MS-063 Model and Simulation for Advanced Manufacturing
| Optimizing the Geometric Parameters of Cutting Edge for Finishing Machining of 30Cr2Ni4MoV Alloy Steel | |
| Bicheng Guo, Feng Jiang, Tongkai Liao, Fuzeng Wang, Lan Yan |
MS-064 Particle Methods and Their Applications in Engineering
| Numerical Investigation of Martian Entry Vehicles Aerodynamics for Hypersonic Rarefied Conditions | |
| Fei Huang, Xiao-wen Liu, Xu-hong Jin |
MS-065 Computational Marine Hydrodynamics
| Numerical prediction and analysis of motion response of high speed planing craft in regular waves | |
| Hongjie Ling |
| Numerical Simulation of Regular Waves onto a Vertical Circular Cylinder | |
| Zhenghao Liu, Decheng Wan |
MS-066 State-of-the-art modeling on discrete element simulation
| CFD-DEM Study of the Effect of Cyclone Arrangements on the Gas-solid Flow Dynamics in the Full-loop Circulating Fluidized Bed | |
| Shuai Wang, Kun Luo, Junjie Lin, Chenshu Hu, Jianren Fan |
| Numerical study of hydrodynamics and heat transfer in a spouted bed | |
| junjie lin |
MS-070 Advances in Numerical Methods for Multiple Inclusion Problems
| Development of a three-dimensional volume integral equation method | |
| Jungki Lee |
MS-073 Computational fatigue and fracture mechanics performance
| On the foreign object damage based fatigue mechanism of high-speed railway axles | |
| Y Luo, S.C. Wu, Z.W. Xu, Z.X. Zhang, Z.W. Li |
| On the defect tolerance based fatigue crack growth life prediction of railway axles | |
| yuxuan Liu, S.C. WU |
MS-077 Engineering Inverse Problems: theory and numerical methods
| Parameter identification for high-fidelity simulation | |
| cao lixiong |
| The Identification of the Constitutive Model Parameters of White Matter of Brain Tissue | |
| Qiming Liu |
MS-100 Advanced Computations in Engineering Science (by invitation only)
| An edge-based smoothed finite element method (ES-FEM) for acoustic problems using four-node quadrilateral elements | |
| Wei Li, Xiangyu You, Yingbin Chai, Ming Lei |
| Particle modeling at ACES in two decades | |
| Moubin Liu |
Publication On e-Proceedings Only
| Biot’s Consolidation analysis using the node-based smoothed point interpolation method (NS-PIM) | |
| Shiyang Pan, Tongchun Li, Jing Cheng, Ping Yuan, Xinyang Ning |
| An Improved Algorithm for Clustering | |
| Tsan-Jung He, Zhao-Yu Wang, Shie-Jue Lee, Shing-Tai Pan |
| Two-Dimensional Unsteady Flow Calculations of a Five Bladed Vertical Axis Wind Turbine | |
| Nishant Mishra, Praveen Laws, Rajagopal Vinod Bethi, Santanu Mitra |
| Solving nonlinear singular boundary value problems using a newly constructed scaling function | |
| Yanan Liu |
| Smoothed finite element methods for solving 3D steady and transient | |
| Ruiping Niu, G.R. Liu, J.H. Yue |
| Development of the advanced software package based on S-FEM | |
| Ruiping Niu, J.F. Zhang, J.H. Yue, Y. Li |