MS-1: Computational Mechanics for Solids and Structures
| Keynote: Stress Concentration Factors of Matrix in a Composite Subjected to Transverse Loads | |
| Zheng-Ming Huang |
| Keynote:Convolution Quadrature BEM for Wave Analysis in General Anisotropic Fluid-Saturated Porous Solid and its GPU Acceleration | |
| Akira Furukawa, Takahiro Saitoh, Sohichi Hirose |
| Complex modal analysis using undamped modes | |
| Yujin Hu, Li Li |
| Accurate Transient Response Analysis of Non-Classically Damped Systems | |
| Li Li, Yujin Hu, Ling Ling |
MS-2: Optimization Design of Complex Structure Systems
| A 3D Knowledge-Based On complicated Mould Design system | |
| amit kumar Haldar |
MS-3: Particle Based Methods
| Preliminary investigations into progressive failures using the implicit material point method | |
| bin wang, Philip Vardon, Michael Hicks, zhen chen |
MS-7: Modeling and simulation of functional materials and structures
| Transient dynamic crack analysis in multifield coupled smart functional materials by XFEM | |
| TINH QUOC BUI, Chuangzeng ZHANG, Sohichi HIROSE |
MS-10: Numerical Methods for Damage and Fracture Analyses in Composites
| Invited: The effect of stacking sequence on foreign object damage to CFRP laminates | |
| Ryo Higuchi, Tomonaga Okabe |
MS-11: Large Scale Coupled Problems and Related Topics
| Invited: Effect of GPU Communication-Hiding for SpMV Using OpenACC | |
| Olav Aanes Fagerlund, Takeshi Kitayama, Gaku Hashimoto, Hiroshi Okuda |
MS-14: Structural and material optimization
| Invited: Computing Lipschitz and Calmness Moduli in Linear Optimization | |
| María Josefa Cánovas, Abderrahim Hantoute, Juan Parra, Francisco Javier Toledo |
MS-17: Analytical and numerical analysis of electro- and magnetomechanical systems
| Investigation of the Structural Integrity of Embedded Device Composites | |
| Yi Xiao, Wenjing Qiao, Hiroshi Fukuda, Hiroshi Hatta |
MS-18: Computational and Theoretical Biomechanics
| Simple Matrix Method with Nonhomogeneous Space Increments in Finite Difference Method | |
| Sungki Min, Junghwa Hong, Hunhee Kim |
MS-21: Modelling and Simulation of Fiber-Reinforced Composites,
| Mechanical Characterization of novel contour core panels | |
| amit kumar Haldar |
MS-22: Uncertainty Modeling & Reliability Analysis
| Keynote: A reliability analysis method for structures with correlated parameters using vine copula | |
| Chao Jiang, Wang Zhang, Xu Han |
| Invited: Explicit iteration based-MCS for random vibration of nonlinear systems | |
| Cheng Su, Huan Huang, Haitao Ma |
MS-24: Atomic and Multiscale Modelling and Simulation
| Keynote: Mechanical Properties and Behaviors of Hierarchically Nanotwinned Materials under Indentation and Scratch | |
| Yonggang Zheng, Haitang He, Hongwu Zhang, Hongfei Ye |
MS-25: Recent Advances In Meshfree and Particle Methods
| Keynote: Smoothed particle hydrodynamics method for elastic-plastic structures | |
| Seiya Hagihara, Sho Fumoto, Tomohiro Shirahama, Satoyuki Tanaka, Shinya Taketomi, Yuichi Tadano |
MS-27: Computational Fracture Mechanics for Quasi-Brittle Materials
| Keynote: 3D In-situ XCT Image Based Meso-scale Fracture Modelling and Validation of Concrete Using Voxel Hexahedron Meshing and Damage Plasticity Model | |
| Yujie Huang, Zhenjun Yang, Wenyuan Ren, Guohua Liu, Chuanzeng Zhang |
MS-29: Computational Biomedical Engineering
| challenge of visualising large airway flows and particle transport | |
| hadrien calmet, Alberto Gambaruto, Guillaume Houzeaux, Allister Bates |
MS-33: Computational Modelling and Simulation in the Development of Medical Devices
| Invited: Evaluation of Hemodynamic Performance of a Novel Carotid Covered Stent | |
| Foad Kabinejadian, Fangsen Cui, Pei Ho, Hwa Liang Leo |
MS-35: Residual Stresses and Eigenstrains
| Efficient Prediction of Bending Deformation with Eigenstrain for Laser Peen Forming | |
| Yongxiang Hu |
MS-37: Computational Methods for Tensegrity and Tension Structures
| Invited: Dynamic Modeling of Tensegrity Robots Rolling over the Ground | |
| Shinichi Hirai, Ryo Imuta |
| Self-equilibrium Analysis of Cable Structures based on Isogeometric Analysis | |
| Keigo Harada |
MS-38: Mechanics and biomimetics of surface and interface
| Molecular dynamic simulation on collision induced cold welding in ceramic nanoparticles | |
| Zijian Yao, Yonglong Hu, Bing Chen, Jian Lu, Xinrui Niu, Jiabin Liu |
MS-41: Development and application of smoothed finite element method
| Feature Extraction of Hand-Vein Patterns Based on Ridgelet and Morphing Transform | |
| Xiao Han, Yu Zhang, Siliang Ma |
MS-44: Multiscale Modeling of Mechanical Property
| Keynote: Pull-out Force Predictions of Carbon Nanotubes From Polymer and Ceramic Matrices | |
| Ning Hu, Y. Li, H. Ning |
MS-47: FE/DE Method and Applications
| Invited: A temporally-piecewise adaptive algorithm with SBFEM to solve viscoelastic problems | |
| Yiqian He, Haitian Yang, Andrew Deeks |
MS-51: Computational Modelling of Materials with Uncertainty
| Scaled boundary finite element analysis for elastic problems with interval parameters | |
| Weihong Ma, Yiqian He, Haitian Yang |
MS-52: Efficient Methods for Uncertainty Quantification
| KL-expansion-based Monte Carlo simulation for dynamic reliability of structures subjected to non-stationary random excitations | |
| Cheng Su, Rui Xu, Huan Huang |
MS-59: Computational Methods and Analysis of Dynamic Phenomena with Contact and Friction Interfaces
| Numerical Simulation of Nonlinear Ultrasonic Wave Generation by an Interface Crack of Bi-material | |
| Taizo Maruyama, Takahiro Saitoh, Sohichi Hirose |
| Assessing the bifurcation behaviour of periodic solutions in finite-element brake squeal models | |
| Nils Gräbner, Merten Tiedemann, Utz von Wagner, Norbert Hoffmann |