MS-002 Advanced Computational Modelling of Fracture and Damage
| Mesh-Size Sensitivity for Reinforced Concrete: a Case Study | |
| Xiaodan Ren, Chengdong Yang |
MS-003 Modelling and Simulation on Nanomechanics
| A micromechanics-based parametric study on the electrical behavior of porous nanocomposites reinforced with carbon nanotubes | |
| B.J. Yang, G.U. Ryu, H.K. Lee |
MS-004 Computational Methods and Applications in Geoscience & Engineering
| A Fully Coupled Finite Element/Finite Volume Method for the Massively Parallel Simulation of Hydraulically Driven Fractures in 3-Dimensions | |
| Randolph R Settgast, Joshua A White, Chandrasekhar Annavarapu, Pengcheng Fu, Yue Hao, Fredrick J Ryerson, Joseph P Morris |
| Application of Bayesian Networks for Estimating Water Saturation | |
| Rosa María Mariscal-Romero, Hector Benítez-Pérez, Ernesto Rubio-Acosta |
MS-006 Computational Methods in Engineering
| Simple method of approximate calculation of statically indeterminate trusses | |
| Janusz Rębielak |
| A high order finite volume solver for simulation of heat transfer in compressible flow from very low to intermediate Mach numbers | |
| Carlos Jesus Romero Casado |
| Examples of Non-commutative Groebner Bases to Plate Bending Analysis | |
| Y. Jane Liu, Bruno Buchberger, Markus Rosenkranz, Alexander Maletzky |
| Static calculations and structural design with application of principle of superposition | |
| Janusz Rębielak |
MS-017 Modelling and Characterisation of Mechanical Behaviour of Advanced Materials
| Study on necking propagation of double network hydrogel | |
| Isamu Riku, Koji Mimura |
MS-024 Computational Methods for Images, Graphics, and 4D-Data
| 3D Cloud Data and Triangle Faces Compressed by Novel Geometry Minimization Algorithm and Compared with other 3D formats | |
| Mohammed M. Siddeq, Prof. Marcos A. Rodrigues |
MS-036 Numerical methods for structural dynamics, control and health monitoring
| Invited: Damage Location Identification of Simply Supported Steel Truss Bridge Based on Displacement | |
| Shaopu Yang, Jianying Ren, Shaohua LI |
MS-037 Multilevel direct and iterative solvers for linear systems: theory and applications
| Using low-rank approximation techniques for engineering problems. | |
| Julie Anton, Cleve Ashcraft, Pierre L'Eplattenier, Roger Grimes, Francois-Henry Rouet, Clément Weisbecker |
MS-042 Recent Advances In Meshfree and Particle Methods
| A 3-D Meshfree Numerical Model to Analyze Cellular Scale Shrinkage of Different Categories of Fruits and Vegetables during Drying | |
| Charith Malinga Rathnayaka Mudiyanselage, Helambage Chaminda Prasad Karunasena, Yuan Tong Gu, Lisa Guan, Jasmine Banks, Wijitha Senadeera |
MS-045 Knowledge Based Artificial Intelligence Applied To Computer Aided Engineering
| A Domain Language for Constructive Block Topology for Hexa Mesh Generation | |
| Robert Rainsberger |
MS-050 Multiphysics Computation and Applications
| An Euler-Lagrange Approach to Model the Dynamics of Particulate Phase Exposed to Hot Gas Injection into Packed Bed Reactors | |
| Edder Jose Rabadan Santana, Bernhard Peters |
MS-054 Failure and instabilities in soft materials and geomaterials
| Keynote: Micro-mechanical constitutive formulation of strain-induced crystallization in soft rubber-like materials | |
| Reza Rastak, Christian Linder |
MS-055 Structural uncertainty analysis and design
| Sequential Stochastic Response SurfaceMethod using Moving Least Square based Sparse Grid for Efficient Reliability Analysis | |
| Amit Kumar Rathi, Sudhi P V Sharma, Arunasis Chakraborty |
MS-064 Structural damage by internal/external explosion
| Concepts of Coupled FEA-CFD Analyses for Vehicle Structures under High-Pressure Shock Compression | |
| Arash Ramezani |
MS-065 Inverse problems in Engineering
| Heat flux identification using reduced model and the adjoint method. Application to a brake disk rotating at variable velocity | |
| Sylvain CARMONA, Yassine ROUIZI, Olivier QUEMENER, Frédéric JOLY |