Plenary Lecture
| PL: On Higher-Order Shell Finite Elements and a Computational Approach for Fracture | |
| J.N. Reddy |
| PL: Integrated Computational Materials Engineering (ICME) for designing resilient buildings and infrastructure against extreme loads | |
| Tuan Ngo |
| SPL: Large deformation modelling of coupled flow-deformation problems in unsaturated porous media using SPH method | |
| Ha BUI |
| SPL: Model-constrained deep learning approaches for inference, control, and uncertainty quantification | |
| Tan Bui-Thanh |
| SPL: Hierarchical cellular structures for impact applications | |
| Pattabhi Ramaiah Budarapu |
| SPL: Efficient data-collection strategy and hyperparameter tuning for machine learning using Bayesian optimization | |
| Jaehong Lee |
| SPL: Isogeometric Methods in Structural Analysis | |
| Josef Kiendl |
| SPL: Some recent advances in Isogeometric Analysis with a special focus on structural and coupled simulations | |
| Alessandro Reali |
| SPL: CT image-based damage and fracture modelling and validation of Concrete and FRC | |
| Zhenjun Yang |
| SPL: Selective laser sintering of polymer composites: modelling, design, and applications | |
| Kun Zhou |
MS-000 General Papers
| The inverse analysis of thermophysical parameters of Malan loess based on machine learning and finite element method | |
| Qingbo Chen |
| A stable node-based smoothed finite element method with transparent boundary conditions for the elastic wave scattering by obstacles | |
| Shiyao Wang |
| Bi-potential method applied for multiple collisions problems of discrete element system and multi-body system | |
| Ling Tao, ZhiQiang Feng, Yan Li, Huijian Chen |
| A Reliability Analysis Method for Bearing Elastohydrodynamic Lubrication under Stochastic load | |
| Miaojie Wu |
| An edge-based smoothed finite element method for 2D frictionless contact problem | |
| Chao Sun |
| Structured grids based method with reformed boundary basis functions for solid and structure | |
| Yanan Liu, Fangxiong Tang, Guansi Liu |
| Influence of random soil parameters on seismic reliability of underground structure | |
| Yifan Fan, Zhiyi Chen, Zhiqian Liu |
| Rapid seismic damage evaluation of subway stations using machine learning techniques | |
| Pengfei Huang, Zhiyi Chen |
| Extremely accurate solutions to the Hilbert equation systems | |
| Edward John Kansa |
MS-001 Theory and Formulation for Novel Computational Methods
| Nonlinear analysis of steel frames under thermal loading | |
| Joe Petrolito, Daniela Ionescu, Ashley Sim, Timothy Lougoon |
| On the spatial symmetry of high-resolution simulation for compressible flow | |
| Hiro Wakimura |
| The Competition between Entropy and Potential Energy in Contact Mechanics | |
| Zhaocheng Xuan |
| TWO-WAY NEURAL NETWORK COMPUTATIONAL INVERSE THEORY METHOD | |
| YL Li, SY Duan |
| Transformed Newton’s method with a fixed-point iteration for highly nonlinear problems in structural mechanics | |
| Ngoc M. La, Cuong T. Nguyen, Minh N. Dinh |
MS-002 Particle Based Methods
| Atom-based molecular mechanics method for predicting the mechanical property of molybdenum disulfide (MoS2) | |
| Hongfei Ye, Dong Li, Yonggang Zheng, Hongwu Zhang, Zhen Chen |
| Mixed-mode delamination analysis of interface cracks in peridynamics | |
| Heng Zhang |
| Concurrent Simulation of Shear-Band Evolution Based on the Material Point Method and Coarse-grained Molecular Dynamics | |
| Yu-Chen Su, Zhen Chen |
| An efficient parallel framework for smoothed molecular dynamics method | |
| LeiYang Zhao, Shuai Wang, Yan Liu |
MS-004 Boundary Element Methods and Mesh Reduction Methods
| Electromagnetic scattering simulation based on element differential method | |
| Gao Lanfang |
| Zonal Free Element Method in Structure-Fluid Coupling Analysis Based on Interface Nodes Topology Sequence Interpolation Technique | |
| Xiao-Wei Gao |
MS-005 Reduced order models for structures and fluids
| A Non-intrusive Parametrized Reduced Order Modeling for Unsteady Flows based on Proper Orthogonal Decomposition | |
| Jianyao Yao |
MS-006 Energy Absorption and crashworthiness of Structures and Materials
| Box test and numerical simulation on settlement and energy dissipation characteristics of ballast under cyclic load | |
| Tianqi ZHANG |
MS-008 Modeling and Simulation of Complex Flow and Transport Phenomena
| Numerical simulation of continuous extraction of Li+ from high Mg2+/Li+ ratio brines based on free flow ion concentration polarization | |
| Dongxiang zhang |
MS-009 Computational Methods in Fluid Engineering
| Application of a 2D adaptive mesh refinement method to the flow over wall-mounted plate | |
| Zhenquan Li |
| Improved smoothed particle hydrodynamics (SPH) model for simulation of abrasive water-jet (AWJ) | |
| Ran Yu, Xiangwei Dong, Mingchao Du, Zengliang Li, Long Feng |
| Numerical study of flapping foil energy harvester based on an adaptive immersed boundary-lattice Boltzmann flux solver | |
| Li Weizhong |
MS-010 Data-driven Surrogate Modeling Techniques for Inverse and Other Related Problems
| A novel surrogate model based multi-objective optimization method towards high IGD quality | |
| Puyi Wang, Chengxiang Huang, Yingchun Bai |
| DADOS: A Cloud-based Data-driven Design Optimization System | |
| Shuo Wang, Yonggang Zhao, Xueguan Song |
| Bregman-iterative greedy coordinate descent for sparse polynomial chaos expansion in structural uncertainty analysis | |
| Jian Zhang, Xinxin Yue, Jiajia Qiu |
MS-011 Damage and Failure Modelling in Composite Materials
| Effects of impactor mass and dimension on CFRP laminates under impact loading | |
| Yuan Ke |
| Analysis of failure process of bonded pipe joints under tension loads | |
| Hong Yuan, Jun Han, Lan Zeng, Ziyong Mo |
| An experimental and numerical study of additively manufactured Alsi10Mg shell structures with lattice infill | |
| Chengxiang Huang, Puyi Wang, Yingchun Bai |
MS-012 Deformation, Fatigue and Fracture of Advanced Materials
| Phase transition in Polymer Derived Ceramics (PDCs) and its effect on mechanical response | |
| Yan Li, Chi Ma |
MS-013 Large Scale Coupled Problems and Related Topics
| Performance evaluation of centroidal Voronoi tessellation for initial particle distribution of particle methods | |
| Masao Ogino, Yutaka Ogisu |
| Timber traceability with CNN Based Image Recognition Technology | |
| Zheng Hongjie, Asano Miyoko, Asano Yoshiharu |
MS-015 Smoothed Finite Element Methods and Related Techniques
| Explicit Dynamic Analysis using SelectiveCS-FEM-T10 with Radial Element Subdivision | |
| Yuki Onishi |
| Modes and modal analysis of three-dimensional (3D) structures based on the smoothed finite element methods (S-FEMs) using automatically generatable tetrahedral meshes | |
| Jingui Zhao |
| A 3D selective smoothed finite element method for analysis of the human annulus fibrosus with fiber-matrix interaction | |
| Xue Yan |
| A full smoothed high order cell based finite element method for analysis of axisymmetric problems | |
| Xin Cui, Zirui Li |
| Introduction to the strain-smoothed element method | |
| Hoontae Jung, Chaemin Lee, Phill-Seung Lee |
| Analysis of transcranial stimulation problems based on the smoothed finite element method | |
| Gang Wang, Zhonghu Wang |
MS-016 Computational Mechanics for Composite Plates and Shells
| Structural optimization of laminate composite structures using equivalent static loads | |
| yijae choi, Jinhwan Park, Kyunghun Jeon, Jaemin Moon, Donghyeon Yoo, Chang-Wan Kim |
| Modeling and simulation application of multilayer laminated materials in multi-physical fields | |
| Wenxing Chen |
MS-017 Computational methods in Hydraulic engineering
| Entropy production analysis of energy loss of a Francis turbine under overall operating conditions: hybrid RANS/LES simulations | |
| Zhi-Feng Yu |
| Numerical modelling investigation of wave overtopping on stepped-type seawall structures | |
| Loi Bao Dang |
MS-018 Data, Uncertainty, Machine Learning and Digital Twin
| Economic Parametric Optimization and Uncertainty Analysis in Ship Design using Monte Carlo Simulations | |
| Yuan Hang Hou, Chong Fu, Ye Ping Xiong |
| Improved Strategies for YOLOv2 + OC Object Detection System | |
| Yijun Lu, Ningning Lu, Heng Ouyang, Shuyong Duan |
| Smoothed-Jump Q-Learning Algorithm for Optimal Robot Agent Path Planning | |
| Lin Xin Zhang, Shu Yong Duan, Xu Han |
MS-019 Methods for Multi-Phase Flows
| A hybrid VOF and level set interface capturing scheme with cubic surface representations for unstructured meshes | |
| YUNONG XIONG, BIN XIE, FENG XIAO |
MS-020 Particle-based methods and applications to geomechanics
| Influence of material properties on the mechanical responses of an underwater soil mixing process | |
| Jian Chen, Daisuke Nishiura, Mikito Furuichi |
MS-022 Multiscale modelling of engineering materials
| A robust and efficient micromechanical tool in studying Hygro-Thermo-Electro-Elastic composites | |
| Guannan Wang |
MS-025 Meshfree and Other Advanced Numerical Methods for Engineering and Applied Mathematical Problems
| An adaptive smoothed particle hydrodynamics for metal cutting simulation | |
| Yijin Cheng, Yan Li, Zhiqiang Feng |
| A meshfree stabilized collocation method and its applications in fluid-structure interactions | |
| Lihua Wang, Zhihao Qian |
MS-027 Modeling and Simulation for Additive Manufacturing
| BESO Approach for the Optimal Retrofitting Design of Steel Hollow-Section Columns Supporting Industry Cranes | |
| Rut Su, Thu Van Huynh, Sawekchai Tangaramvong |
| Predictive study on mechanical behavior of additively manufactured Nylon products with holes considering a probable occurrence of geometrical imperfection | |
| Mizuki Maruno |
| Quantifying the discrepancies in the geometric and mechanical properties of the theoretically designed and additively manufactured scaffolds | |
| Yongtao Lyu |
MS-028 Computational Acoustics and Elastodynamics in Materials and Structures
| Spectral finite element method combined with bi-potential approach for efficient simulation of contact acoustic nonlinearity | |
| Huijian Chen, Hongchen Miao, Ling Tao, Zhiqiang Feng |
| Analysis of transient elastic wave scattering by cavity in micropolar elastic solids using 2-D M-EFIT | |
| Yusuke Suzuki, Takahiro Saitoh, Sohichi Hirose |
| Detection and sizing of surface cracks on tubular components by ultrasonic phased array with surface acoustic waves | |
| JING XIAO, YUE HU, SHUAI CAO, FANGSEN CUI |
| The finite element method for inverse wave scattering in rods | |
| Bang X. Trinh, Cuong T. Nguyen |
MS-029 Kernel and machine learning based solutions of PDEs
| Physics-Information-based Solver for Surface Partial Differential Equations | |
| Zhuochao Tang, Zhuojia Fu |
MS-030 New methods of approximate static calculations
| Static equivalent modeling of dynamic seismic forces for realizing earthquake resistant spatial truss structures | |
| Koichiro Ishikawa, Zhiyuan Gao |
MS-032 Acoustic metamaterials and phononic crystals: from fundamental theory to potential applications
| A material parameter estimation method based on ultrasonic echo measurement and neural network | |
| jialin zhang, Heng Ouyang, shuyong Duan |
MS-033 Design optimization of structures and metamaterials
| Phasor particle swarm optimization of dome structures under limited natural frequency conditions | |
| Ei Cho Pyone |
| A Chaos Game Optimization Method for Weight Minimization of Steel Truss Structures | |
| Eain Kyi Thar, Sawekchai Tangaramvong |
| Simultaneous Size and Shape Steel Structural Optimization using Enhanced Comprehensive Learning Particle Swarm Optimization | |
| Soviphou Muong |
| A Turbulent Flow of Water-Based Optimization for the Optimal Sizing Design of Steel Trusses | |
| Saw Thiri Khaing |
| Optimization analysis of stiffened composite plate using iJaya algorithm | |
| THUAN PHAT LAM |
MS-034 Local and nonlocal modeling approaches in dynamics
| Numerical modeling and analysis of acoustic emission crack sources | |
| Siddhesh Raorane, Tadeusz Uhl, Pawel Packo |
MS-035 Computational Biomechanics
| Blood Flow in Right Coronary Arteries with Multiple Stenoses | |
| Biyue Liu |
| Second Harmonic Generation Image-based Strain Analysis of an Osteon in Peri-Implant Jaw Bone | |
| Noemie Jeannin, Naoki Takano, Kento Odaka, Satoru Matsunaga |
| A novel parameters identification procedure for aortic walls based on hybrid artificial intelligence approaches | |
| Jianbing Sang, Yang Li, Xinyu Wei, Zhengjia Shi, Kexin Shao |
| Multiscale modeling for pulmonary airflow simulation | |
| Fei Jiang, Xian Chen, Tsunahiko Hirano, Junji Ohgi, Kazuto Matsunaga |
MS-036 Recent Advances and Developments for Damage and Failure of Engineering Materials and Structures
| Dynamic fracture modelling of impact test specimens by the polygon scaled boundary finite element method | |
| Jiang Xinxin, Zhong Hong |
| Comparative study to analyze deformation/fracture behavior under high-velocity impact using different dynamic transient operators | |
| Yogeshwar Jasra, Pardeep kumar, Nikesh Ojha, Ravindra Kumar Saxena |
MS-038 Mechanics of soft materials
MS-040 Computational methods for advanced soft matter and soft robotics
| Twinning prediction of annealed pure Ti printed by selective laser melting based on machine learning | |
| KEWEI CHEN |
| A Review of Theoretical Modeling and Numerical Simulation of Directed Energy Deposition (DED) Process | |
| Stanley Jian Liang Wong, Hua Li |
MS-041 Computational Particle Dynamics
| Application of Riemann solver on FPM for solving weakly incompressible flows | |
| Fan Zhang, Moubin Liu |
| Modelling of two-layer sloshing based on Consistent Particle Method | |
| Xiujia Su, Xizeng Zhao, Min Luo |
| Numerical investigations on penetration of target plates by shaped charge jet using the smoothed particle hydrodynamics (SPH) method | |
| Jiahao Liu, Zhilang Zhang, Moubin Liu |
| A new Lagrangian discontinuous Galerkin scheme on moving unstructured triangular mesh | |
| wenbin wu, Moubin Liu, Na Liu, Chao Huang |
| Numerical methods for biofilm life cycle modeling at different time scales: from space-time finite element to SPH | |
| Dianlei Feng, Insa Neuweiler, Moubin Liu |
| Modeling and simulation of gas and solid particle two-phase flow in the abrasive air-jet machining | |
| Guangpei Zhu, Moubin Liu |
MS-042 Computational and Machine Learning Studies of Hierarchical Cellular Structures
| An isogeometric collocation method for modeling the mechanical properties of honeycomb structures | |
| Cosmin Anitescu, Yue Jia, Timon Rabczuk |
| Impact analysis of sandwiched thin-walled tubes with face plate | |
| Venkata Ravi Vusa, Pattabhi Ramaiah Budarapu |
| Performance analysis of hierarchical sandwiched honeycomb core cellular structures | |
| Dileep Kumar Korupolu, Venkata Ravi Vusa, Pattabhi Ramaiah Budarapu |
MS-043 Multiscale multiphysical damage and fracture simulation of cementitious composites
| Micro CT image-based reconstruction of random fields and mesoscale fracture modelling of concrete | |
| Yu-jie Huang, Hui Zhang, Zhen-jun Yang, Jian-ying Wu |
| Two-dimensional meso-scale simulation of hydraulic fracture in concrete | |
| kelai Yu, Zhenjun Yang, Xin Zhang, Guohua Liu |
| A hydro-damage-mechanical coupled numerical method for fracking in poroelastic media based on a phase-field regularized cohesive zone model | |
| Hui Li, Zhenjun Yang |
| Mesoscale modelling of interfacial failure between FRP sheet and concrete | |
| Zihua Zhang, Jialong Guo, Xuan Wang |
| Meso-scale modelling of ceramic ball aggregated ultra-high performance geopolymer concrete under projectile impact | |
| Kefo Qu, Jian Liu, Chengqing Wu |
MS-044 Uncertainty quantification and analysis for structures
| Sensitivity analysis of artillery external ballistic based on the approximate high dimensional model representation | |
| Nichen Tong, Qiming Liu, Xu Han |
| A Novel Dimensionality Reduction Method for Inverse Problem | |
| Zhiping Hou, Shuyong Duan, Xu Han, Guirong Liu |
| An efficient reliability-based design optimization approach using PDF-based performance shift strategy | |
| Zhe Zhang, Chao Jiang |
| Combined Gaussian process regression model and comprehensive learning particle swarm optimization for reliability-based structural design | |
| Thu Van Huynh |
| Optimal Inspection Period for Structures Subjected to Fatigue | |
| Feng Li |
| Generalized probability and interval hybrid reliability analysis based on a two-stage active learning Kriging model | |
| Mengchen Yu, Xiangyun Long |
MS-045 Data-driven modeling and design approaches
| An Adaptive Artificial Neural Network-based Deep Generative Design Method | |
| Wenjing Ye, Chao Qian, Renkai Tang |
MS-046 Micro-/Nano-mechanics for Novel Materials
| Dynamic Analysis of Non-contact Atomic Force Microscope by Vibration Characterization | |
| Tang LianChen, Xiao WenLei |
| Molecular dynamics study of oxygen adsorption and oxidation on aluminum surface | |
| Youngoh Kim |
| Molecular dynamics analysis of interstitial sites change of MWCNT bundle according to in-plane compression deformation | |
| Byeonghwa Goh |
| Effective Enhancement of Carbon Nanothread on the Mechanical Properties of Polyethylene Nanocomposite | |
| Chengkai Li |
| Thermal Transport Properties of Polymer Nanocomposites with Ultrathin Carbon Nanothreads | |
| Haifei Zhan |
MS-047 Computational design, optimization and manufacturing advanced materials and structures
| Additively manufactured meta-lattice sandwich plates for broadband low-frequency vibration suppression | |
| hao li, Jianlin Chen, Bing Li |
| Broadband elastic metasurface for extraordinary wavefront manipulations | |
| Yabin Hu, Bing Li |
| Compact elastic metamaterial structures for vibration and elastic-wave control | |
| Bing Li, Eric Li, Yongquan Liu |
| Estimation of the welding current in Gas Tungsten Arc welded (GTAW) process with a specified width penetration | |
| Quan Nguyen, Son Nguyen_Hoai, Long Nguyen_Nhut_Phi, Thuan Lam_Phat |
Publication at the conference Proceedings
| Dynamic analysis of a rotating functionally graded rectangular plate based on radial point interpolation method | |
| Chaofan Du |
| The weak form of free element method | |
| Weilong Fan |
| A kinematic yield design of materials using computational homogenization analysis and stabilized radial point interpolation method | |
| Canh Le, Phuc Ho, Phuong Nguyen |
| Comparative analysis of some results of static calculations obtained in the two-stage method | |
| Janusz Rębielak |
| Application of boundary face method in cathodic protection problems | |
| Sanshan Tu, Yanjie Wei, Shengzhong Feng, Zhongyang Dai |
| A parameter-free methodology for boundary identification of topology optimization results | |
| Yang Liu |
| An improvement of linear polyhedral finite element method using consecutive interpolation scheme | |
| Hau Ngoc Nguyen, Hung Xuan Nguyen, Wahab Abdel Magd |
| A method for Helmholtz operator and application to free vibration problem of thin plate on Pasternak foundation | |
| Shanqing Li, Hong Yuan, Jiarong Gan |
This work is licensed under a Creative Commons Attribution 3.0 License.