MS-000 General Papers
| A semi-analytical method for the one-dimensional Burgers' equation | |
| Qiang Gao, Weian Yao, Mingyu Zou |
| A sphere relaxation based approach for three-dimensional mesh deformation | |
| xuan zhou |
MS-001 Theory and Formulation for Novel Computational Methods
| Moving beyond continuum based numerical model for geomechanics | |
| Gaofeng Zhao |
| Study on elastic matrix model of the bi-modulus finite element | |
| Zhiming Ye, Huiling Zhao |
| The influence of the parameter h and a new modified method of Homotopy analysis method for initial value problems | |
| ZHEN WANG, LI Zou |
MS-002 Modelling and Simulation on Nanomechanics
| A molecular dynamics study on deformation mechanisms and mechanical properties of {-1 011}<10-12> nanotwinned magnesium | |
| Lei Zhou |
MS-005 Computational Modeling of Advanced Materials
| Multiscale Method for Mechanical Analysis of Pressure-actuated Cellular Structures with Polygonal Microstructures | |
| Jun Lyu, Hongwu Zhang, Xiaowei Gao |
MS-009 Computational Acoustics and Elastodynamics in Solids and Structures
| Invited: Vibration analysis of multiferroic rectangular plates using higher-order shear deformation theory | |
| Yunying Zhou |
| Improved Complex Mode Theory and It Truncating Acceleration Technique | |
| Yaping Zhao |
MS-012 Discrete Finite Element Method and Its Applications
| Keynote: Simulation of pneumatic tire running on sand bed by using the FEM/DEM | |
| Mengyan Zang, Chunlai Zhao, Shunhua Chen |
| Keynote: A ghost particle-based coupling approach for combined finite-discrete element method | |
| Hu Chen, Y.X. Zhang, Mengyan Zang |
MS-025 Orthopaedic Biomechanics and Mechano- Biology
| Keynote: Osteoporotic bone fracture healing under the locking compression plate system | |
| Lihai Zhang, Saeed Miramini, Priyan Mendis, Martin Richardson |
MS-026 Cohesive Fracture Modelling of Quasi-Brittle Materials
| A rate-dependent constitutive model for PVB in the impact fracture simulation of laminated glass | |
| Shunhua Chen, Mengyan Zang, Chunlai Zhao |
MS-028 Computational Modelling of Bio-related systems and Nanomaterials
| Invited: Grain Size “Softening” in Nanocrystalline Materials Using a Discrete Dislocation Dynamics Approach | |
| Siu Sin Quek, Zheng Hoe Chooi, Zhaoxuan Wu, Yong Wei Zhang, David Srolovitz |
MS-030 Confidence and Uncertainty Quantification in Computational Mechanics
| Keynote: Stochastic analysis of a radial-inflow turbine in the presence of parametric uncertainties | |
| A. Zou, E. Sauret, J.-C. Chassaing, S.C. Saha, Y.T. Gu |
MS-031 Advanced Computational Modelling & Simulations In Safety
| Selection of nanostructured material parameters of the bainitic steel for the numerical model of the passive armour | |
| Adam Wisniewski, Karol Jach, Pawel Zochowski |
MS-032 Topology Optimization of Structures and Materials
| Topology optimization of anisotropic constrained damping structures | |
| Long Zhao, Qiong Deng, Shuangyan Liu, Mengjia Su, Yihang Xu |
MS-040 Computational Methods in Welding and Joining
| Keynote: Numerical studies on grain growth in friction stir welding | |
| Zhao Zhang |
MS-045 Advances in Computational Geomechanics
| Modelling of rock materials subjected to dynamic loading using a particle-based numerical manifold method | |
| Jian Zhao |
MS-046 Multiscale Modelling of Advanced Engineering Materials
| Keynote: Multiscale modeling of multiple-cracking fracture behaviour of engineered cementitious composites | |
| Ting Huang, Y.X. Zhang, Chunhui Yang |
MS-047 Fatigue Cracking Modeling and Numerical Simulation
| Investigation on the influence of Localized Unbonded-areas on the Crack Growth Characteristic of Diffusion Bonded Titanium Alloy Laminates | |
| Yang Liu, Yongcun Zhang, Shutian Liu, Shan Xiao, Yanpeng Sun, Xiangming Wang |
MS-053 Advances and Applications of the Scaled Boundary Finite Element Method
| Evaluation of the Singular Stress Field of the Crack Tip of the Infinite Elastic Plate | |
| Junyu Liu, Gao LIN, Ping Zhang, Yuyang Wang |
MS-057 Structural Uncertainty Modeling & Reliability Analysis
| Invited: A Meta-model-based Importance Sampling for Reliability-based Design Optimization | |
| Guangsong Chen, Linfang Qian, Wenyu Zhai |
| Research on reliability modeling technology for FMS based on task | |
| Yan Ran, Genbao Zhang, Lin She |
| Global sensitivity analysis for structural models by sparse grid integration | |
| Changcong Zhou |
MS-061 Concrete Structure Damage Due to Explosion
| Invited: Parametric study of FRP-strengthened reinforced concrete panels under blast loads | |
| X Lin, Y.X. Zhang |
MS-062 Modeling and Simulation of High-Speed Multimaterial Flows
| An Effective Three Dimensional MMALE Method for Compressible Fluid Dynamics | |
| Shudao Zhang |
MS-073 Numerical Methods and Applications in Geoscience and Geotechnics
| Development of a fully coupled flow-geomechanics simulator for flow in saturated porous media | |
| Chao Zhang, Sadiq J. Zarrouk, Rosalind Archer |
MS-074 Design and Control of Flexible Smart Structures
| Keynote: Amplitude dependent band gap characteristic of elastic wave propagating in pre-compressed periodic bistable elastic mechanical chain | |
| Yu Huang, Shutian Liu, Jian Zhao |
MS-075 Advances in the Boundary Element Method and Its Applications
| Keynote: An Automatic Topology Recovery Method Based on T-Spline Surfaces Reconstruction in BFM | |
| Chenjun Lu, Jianming Zhang |
| Invited: Isoparametric tube, disk and ring boundary elements and their application in BEM analysis of slender structures | |
| Xiao-Wei Gao, Zhi-Chao Yuan, Wen-Hao Zeng |
| Invited: Simulation of the acoustic filed of a structure vibrating in a subsonic uniform flow using the fast BEM | |
| Qiang Zhou, Chuan-Zhen Li, Zai-You Yan |
MS-077 Advances in Computational Modelling and Optimization for Impact and Blast Problems
| Keynote: Time-dependent reliability analysis with random and evidence variables | |
| Dequan ZHANG, Xu Han, Chao Jiang, Qing Li |
| Bird strike on an engine primary compressor at high rotational speed: Numerical simulations and parametric study | |
| Jia Huang, Yulong Li, Jun Liu, Zhixue Zhang, Zhongbin Tang |
MS-078 Advances in High-performance Finite Element Methods
| Invited: Quasi-conforming formulation method based on couple stress theory | |
| Changsheng Wang, Xiangkui Zhang, Ping Hu |
| Application of the quadrilateral area coordinates: A 4-node quadrilateral membrane element beyond MacNeal’s theorem | |
| Pei-Lei Zhou, Song Cen |
MS-083 Analysis, Modelling and Simulation of Soft Active Materials
| Invited: Numerical techniques for modeling nonlinear oscillation of dissipative dielectric elastomers | |
| Jinxiong Zhou |
| Invited: Modelling viscoelastic dielectric elastomers | |
| Keith Foo, Zhi-qian Zhang |
MS-084 Computational Biomechanics of Musculoskeletal Tissues
| Statistical Analysis of Shape and Stress in the Lower Lumbar using Principal Component Analysis and Partial Least Squares | |
| Shasha Yeung, Amanjeet Sing Toor, Gerard Deib, Ju Zhang, Thor Besier, Justin Fernandez |
Publication at Proceedings Only
| Cementless total hip arthroplasty with and without screw fixation: a randomized study of 78 hips | |
| zhiqi zhu |
| A Highly sensitive mass sensor using high-mode resonant cantilever with step change in thickness | |
| Renjing Gao, Mingli Li, Jian Zhao |
| Numerical Study of Interaction Between Waves and Floating-Body by MPS Method | |
| Decheng Wan, Youlin Zhang |
This work is licensed under a Creative Commons Attribution 3.0 License.